ZDC ZN-7100-DE500-G Quick Setup Manual

Other manuals for ZN-7100-DE500-G: User Manual, User Manual
Manual is about: Outdoor Wireless Access Point

Summary of ZN-7100-DE500-G

  • Page 1

    Zn-7100-de500-g 802.11n dual-band outdoor access point quick setup guide this quick setup guide provides step-by-step instructions on how to set up your zn-7100- de500-g outdoor access point on your network. This guide is intended for use by those responsible for installing and setting up network eq...

  • Page 2

    • a computer running windows 7, vista, or xp • a cat5 utp cable of required length • one of the following power sources: - ieee 802.3at-compliant power over ethernet (poe) source - power adapter came with the package note: if the ap is deployed with a ap controller, please follow the section install...

  • Page 3

    Step 5: install the ap 1. Disconnect the ap’s power adapter from the power outlet (or disconnect the poe cable). 2. Move the ap to its permanent location (accessible to both power source and network connections). Note: make sure that sufficient survey has been made to determine the best placement fo...

  • Page 4

    Step 7: power and connect 1. Connect the ethernet cable from the data in port on the poe injector to your network’s switch. 2. Connect the poe injector to an ac power source. 3. Perform a spot-check to verify if the pwr and lan led are lit to make sure the ap is operating normally. Step 8: verify th...