ZeeVee ZvBox 160 Get Going Manual

Summary of ZvBox 160

  • Page 1

    Zvbox ® 160 720p hd encoder / modulator get going guide zvbox ® 160 is an hd mpeg-2 encoder and frequency agile qam modulator. It allows you to convert any component hd video source, in real-time and very high quality into an hdtv cable channel. This channel is placed onto standard coax wiring, wher...

  • Page 2: Fcc Statement

    Page 2 of 8 www.Zeevee.Com 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instruct...

  • Page 3: Tableofcontents

    Zvbox 160 get going guide page 3 of 8 what’s in the box zvbox 160 • get going guide • usb cable • dc power supply • zvboxwww.Zeevee.Com page3of8 zv150_ggg_v1_0 tableofcontents gettingstarted....................................................................................................4Ͳ5 backpa...

  • Page 4: Getting Started

    Page 4 of 8 www.Zeevee.Com getting started zvbox 160 front panel 1 2 description function 1 led signals the activity of zvbox 160. Also used in programming 2 setup button for setting broadcast channel the led shows solid blue during normal operation. During startup it will show: fast flashing blue/y...

  • Page 5: Basic Installation

    Zvbox 160 get going guide page 5 of 8 basic installation f actory default settings allow your zvbox to broadcast a component hd source with digital audio on channel 2.1, over coax cabling, for reception at connected hdtvs. Plug the power supply into an ac outlet and connect the output to the zvbox 1...

  • Page 6: Configuration

    Page 6 of 8 www.Zeevee.Com configuration valid channels catv 2-135. Rf channel 2 and digital channel 2.1 is the factory setting. Channel spacing none required. Channels can be set directly adjacent to any other well-formed channel and will not cause interference. Tuning in your channel at the hdtv t...

  • Page 7: Configuration

    Zvbox 160 get going guide page 7 of 8 configuration setting the channel via the setup button on the unit front 1. Wait for steady blue led to indicate the unit is ready for programming. Verify the unit is unlocked. (refer to “unlocking the setup button.”) 2. Digits are entered from left to right. Ju...

  • Page 8: Troubleshooting

    Zeevee, inc. • one monarch drive • littleton, ma 01460 • info@zeevee.Com troubleshooting no picture ... Verify the hdtv has a qam (digital cable) tuner. Verify that you have performed a full channel scan on the hdtv with “cable mode” selected. Verify that the modulator is not conflicting with any ot...