ZeeVee ZyPer4K User Manual

Other manuals for ZyPer4K: Configuration Manual
Manual is about: IP VIDEO DISTRIBUTION SYSTEM

Summary of ZyPer4K

  • Page 1

    Zyper4k ip video distribution system user manual updated march 2017.

  • Page 2

    Document symbol conventions: indicates an important piece of information affecting the operation of the unit. Retain this information. Indicates a point of caution. Failure to heed this information may cause a hazard of some form to the operator or others in the field of operation. Indicates a point...

  • Page 3: Contents

    Contents system description 1 .............................................................................. System elements 2 ................................................................................. Encoder function 2 ...........................................................................

  • Page 4

    Equipotential referencing 24 ............................................................... Responsibility and stewardship 25 ......................................................... Reduction of hazardous substances (rohs) 25 ........................................... Waste electrical and electr...

  • Page 5: System Description

    Zyper4k system description the zyper4k series of products from zeevee provide a means for transmitting and receiving audio-visual information across a standard ip network with outstanding quality at very low latencies. A minimal system consists of: • video source • zyper4k encoder device • cable or ...

  • Page 6: System Elements

    Zyper4k system elements encoder function the function of the zyper4k encoder device (encoder) is to accept audio and video data over a variety of interface types, and translate that data to a format suitable for transmission over a standard 10g ethernet network. Video data is segmented, encrypted, p...

  • Page 7: Decoder Function

    Zyper4k decoder function the function of the zyper4k decoder device (decoder) is to accept 10g ethernet traffic that represents the information to be decoded and displayed. When the appropriate ip stream is received the decoder unit will first strip off the encryption that protects the payload on it...

  • Page 8: Management Platform

    Zyper4k management platform most installations will require a zyper management platform (zypermp). This device controls the operation and manages the connectivity between endpoints. The management platform is a hardened controller node that must reside on the same logical network as the zyper4k enco...

  • Page 9: Encoder

    Zyper4k detailed interface descriptions encoder the function of the encoder is to accept raw video images, encode, encrypt and format them for transmission. There are several different variations based on the user’s desired input, media type and interface description. Enclosure variants there are tw...

  • Page 10

    Zyper4k port name index definition hdmi input a hdmi 2.0 input port. Capable of up to 4k60 with hdcp2.2 encryption. Port name index definition rs 232 port a rs232 control port for sending and receiving side-band serial traffic to/from decoders as directed by maestro-z management led pwr b led illumi...

  • Page 11

    Zyper4k optional ports - 10g ethernet the customer may chose which type of ethernet interface is appropriate for the application being addressed. Only one is present at a time and either is available regardless of the enclosure size. Port name index definition 10g fiber a1 10 gigabit ethernet connec...

  • Page 12

    Zyper4k optional ports - usb zyper4k encoder units are available with or without a usb port. Port name index definition usb a usb 2.0 type b port for use usb option is ordered and installed configuration and routing of usb handled by the maestro-z configuration. Lower unit shown with no usb installe...

  • Page 13

    Zyper4k extended input options all encoder units contain a single hdmi 2.0 input port. Optionally, units may be ordered with an “extended” input. Units so ordered will reside in a somewhat larger enclosure. Available interface types are shown: (note: all input types are available with either 10g fib...

  • Page 14

    Zyper4k two different variants of the zeevee hydra breakout cable may be purchased separately for use in the specific user application vga breakout • hd-15 supporting numerous resolutions up to 1900x1600 • analog audio input carrying stereo l/r line-level audio for transport. Analog breakout followi...

  • Page 15: Decoder

    Zyper4k decoder the function of the zyper4k decoder is to accept a 10g ip feed containing the video information to be displayed. It decrypts, decodes and formats the video and audio information for display on the attached viewing device. There are several different variations based on the user’s des...

  • Page 16

    Zyper4k port name index definition hdmi output a hdmi 2.0 output port. Capable of up to 4k60 4:4:4 with embedded audio and hdcp2.2 encryption. Port name index definition rs 232 port a rs232 control port for sending and receiving side-band serial traffic to/from encoders as directed by maestro-z mana...

  • Page 17

    Zyper4k optional ports: 10g ethernet port name index definition 10g fiber a1 10 gigabit ethernet connection. Uses standard 10g sfp devices. 10g copper a2 10g ethernet over cat6a or better cabling. Rj45 user manual page of 13 40 a1 a2.

  • Page 18

    Zyper4k optional ports: usb the zyper4k decoder device can be ordered with optional usb connectivity. Shown to the left is a unit with the usb option (top) and without the usb option (bottom) installed. This is a build-time option and is not retrofittable to the product. Port name index definition u...

  • Page 19: Safety

    Zyper4k general safety and care instructions safety warning: when using electronic products, basic precautions should always be followed, including: • keep these instructions. • heed all warnings. • follow all instructions. • do not use this apparatus near water. • clean only with in accordance with...

  • Page 20

    Zyper4k shock and fire hazard: the unit’s metal case, power supply, and grounding terminals and lugs are essential in containing radio energy as well as safeguarding the user from any risk of electrical shock. The metal shell of the unit protects the internal circuitry from environmentally induced o...

  • Page 21: Cleaning

    Zyper4k cleaning encoder, decoder and zypermp unit cleaning procedures before cleaning: 1.Switch off or fully disconnect the ac power from the external supply unit connector to the zyper unit. 2.If the state of the ac power cannot be established, disconnect the dc input plug from the zyper unit befo...

  • Page 22

    Zyper4k the zyper4k unit is fairly tolerant to cleaning with moistened cleaning cloths, but the unit is not fluid tight. Care should be taken to not spray cleaner directly on to the unit or into the vents to avoid liquid ingress and damage to the internal electronics. Caution: do not apply or spray ...

  • Page 23

    Zyper4k important siting and application considerations zyper4k equipment type and uses zyper4k intended uses • equipment is intended for the distribution of audio visual information in and around a facility. • equipment is intended to distribute human interface and control information over the same...

  • Page 24: Installation Environment

    Zyper4k installation environment the general area where the zyper4k unit is to be installed shall be clean and free of obstructions or clutter. Mounting options • unit may be mounted horizontally on the installed rubber feet • unit may be bolted to a horizontal surface using the provided l-brackets ...

  • Page 25

    Zyper4k water and moisture never expose the zyper4k unit to direct rain, moisture, or excessively high humidity. Never use the device near water - e.G. Near a bathtub, basin, pool, sink, or in a wet basement. Clean only in accordance with the instructions in this manual. User manual page of 21 40

  • Page 26: Ac Mains Connection

    Zyper4k ac mains connection the zyper4k encoder and decoder units are powered through an external ac/dc converter unit. The encoder and decoder units must be powered and connected using the supplied external ac/dc converter. The voltage supplied to the encoder and decoder units from the external sup...

  • Page 27

    Zyper4k ac power cords: ac power cord connect the external ac/dc supply unit to the ac mains with a ul-listed detachable power cord, 3-wire, type sj or equivalent, 18 awg min., rated 250 v min., plug 5-15p configuration for 120v application, or 6-15p for 240v application. Ac/dc converter inlet side ...

  • Page 28

    Zyper4k equipotential referencing in order to insure the voltage potential of the enclosure of the zyper4k unit is referenced to a known common level, the unit may be electrically coupled through the various equipotential mounting points on the unit. There are 4 positions on the chassis suitable for...

  • Page 29

    Zyper4k responsibility and stewardship zeevee is committed to using the planet’s resources efficiently and having as little negative impact on the environment and health of mankind as possible. Our products consume very little energy and attempt to provide the highest level of function for the small...

  • Page 30

    Zyper4k dispose of their waste electrical and electronic equipment by handing it over to an approved re-processor or by returning it an authorized agent of zeevee or their distributor for recycling. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please ...

  • Page 31: Fcc Compliance Statement

    Zyper4k fcc compliance statement the zyper4k family of devices has been tested and found to comply with the limits for class a digital devices pursuant to part 15 of the fcc rules. Operation is subject to the following conditions: 1) these devices may not cause harmful interference, and 2) these dev...

  • Page 32: Emc Information

    Zyper4k emc information the zyper4k devices should be mounted and operated in accordance with the guidelines specified in this guide to maintain the integrity of the expected emc characteristics. The supplied power supply (ac/dc conversion unit) should be used. Any other ac/dc supply has not been te...

  • Page 33: Electromagnetic Immunity

    Zyper4k electromagnetic immunity test iec standard en60601 compliance level result deployment note electrostatic discharge (esd) 61000-4-2 ± 6kv contact ± 8kv air pass expect hard floor of wood, tile, ceramic, metallic material. If floor has synthetic covering, expected relative of humidity of 30% s...

  • Page 34

    Zyper4k device technical specifications encoder and decoder hdmi video specifications all encoders and decoders have one exposed hdmi port. It is an input on the encoder and an output on the decoder. All the parameters in terms of the formats of video and audio carried are the same for either. Hdmi ...

  • Page 35

    Zyper4k encoder extended video input options displayport input option the zyper4k encoder may be purchased with the “displayport input option” pre-installed at the factory. Type parameter displayport option single displayport receptacle support v1.3 of the displayport standard. Direction input resol...

  • Page 36

    Zyper4k “hdsdi” option the zyper4k encoder can be purchased with the commonly referred-to “hdsdi option”. Hdsdi in this context is a misnomer as the option card itself operates up to the 3g-sdi level. A common industry “mis-application” is to refer to anything as “hdsdi” when in reality the intent i...

  • Page 37

    Zyper4k analog option the zyper4k encoder can be purchased with the “analog input option”. This provides for four different types of possible video input (only one input active at a given time). Type parameter analog input option 4 different types of analog video input supported. S-video standard 4-...

  • Page 38

    Zyper4k analog audio (vga-type din cable) 2-channels of line-level l/r analog stereo input through 3.5mm plug spawned by the vga version of the zeevee hydra cable connected to the 13-pin din jack. Digital audio when s/pdif connection of the zeevee hydra analog breakout cable is employed, received au...

  • Page 39

    Zyper4k ethernet options the zyper4m encoder or decoder can me ordered with a single 10g bulk media port that is either fiber ethernet or copper ethernet. Only one of those options is supported at a given time. **only one of the above may be installed at a given time type encoder decoder parameter f...

  • Page 40

    Zyper4k other ports analog audio jack supports a 3.5mm pc-audio type plug with the pinout as shown to the right: type encoder decoder parameter utility ethernet ✓ ✓ single 1gbase-t- rj45 receptacle for general purpose connectivity at encoder or decoder side. Traffic is switched onto same logical seg...

  • Page 41

    Zyper4k physical and environmental the following parameters apply to all encoders and decoders unless specifically stated otherwise. Type parameter a/c adapter 100-1240vac 50-60hz 0.7-0.45a draw on ac mains output max: 12vdc 2.5a zyper4k unit power consumption 12vdc at 1.2a max 12w nominal (encoder ...

  • Page 42

    Zyper4k user manual page of 38 40

  • Page 43

    Zyper4k user manual page of 39 40

  • Page 44: Disclaimers

    Zyper4k disclaimers zeevee has striven to insure that this document is accurate and represents the described products fully. Although, zeevee assumes no responsibility for errors found, should any be found, please contact support@zeevee.Com and corrections will be issued as appropriate. Zeevee hardw...