U s e r m a n u a l master anamorphic lens 135/t1.9 lens flare set date: may 2015.
Version 05/2015 flare set user manual intended use the master anamorphic lens flare sets are designed to be used on arri/zeiss master anamorphic lenses. Each flare set should only be used on the specified focal length. Safety tips caution to ensure proper and safe use, we recommend that you read the...
Version 05/2015 master anamorphic lens 135/t1.9 attention 1. During the assembly ensure that the environment is clean and free from dust so that no dust particles can enter the lens. 2. To tighten and untighten the screws only use a t4 torque wrench with a torque of 0.15nm. If you use the lens in a ...
Version 05/2015 fig.3 front element front trim ring torx t4 m1.7x3.5 inr 534-466 (8x) torque 0.15 nm compendium/matte box ring index mark fig.2 friction wrench assembly instruction for front group 1 untighten the front trim ring with the friction wrench and remove it by hand (fig.2). 2 undo the torx...
Version 05/2015 rear element lds contact socket rear trim ring assembly instruction for rear group 1 undo the torx t4 screws from the rear trim ring and pull the trim ring off (fig.4). 2 undo the inner torx t4 screws in the rear element (fig.5) and carefully remove the element (fig.3). 3 insert the ...
Version 05/2015 notes.
Version 05/2015 before using the products described in this manual be sure to read and understand all respective instruction. The arri/zeiss master anamorphic lens flare sets are only available to commercial customers. The customer grants by utilization that the master anamorphic lens flare sets or ...
Ident.-no.: 80.0007168 · technical data subject to change without further notice. © arri/2015 arnold & richter cine technik gmbh & co. Betriebs kg · türkenstr. 89 · 80799 munich tel.: +49 89 3809 0 for more information please visit www.Arri.Com.
