Zektor SoloCAT HD User Manual - 1. Specifications
Because the SoloCAT HD
™ is HDMI 1.4 compatible it allows
you to take full advantage of the new technology by supporting
much higher resolutions than 1080p or 1440p including 2k
(2048x1080p) and 4k (4096×3072) resolutions. Future
versions of this device will add the capability for Ethernet data
channel, allowing other HDMI 1.4 enabled devices to share a
network connection for internet connectivity. Additionally for
future versions, the audio return channel which will send the
audio signal back from the display to a receiver or other audio
device.
Since the SoloCAT HD
™ has bi-directional IR, it is the perfect
device for multi-room applications and third party control
systems. With bi-directional communication from a remote
control or control system, commands can be sent from the
remote location back to the main equipment center or the other
way around.
Note: The maximum usable distance depends on the quality
and characteristics of the cables. Higher resolutions and longer
transmission distances work better with low skew cables
(
with metal RJ-45 connectors and 568-B termination will provide
best results.
For more information about HDMI over HDBaseT technology
you can visit
www.valens-semi.com.www.atl
1. Specifications
HDMI compliant to v1.4a
3D capable
HDMI Connector 19 pin type female connector
HDMI Source Input Port 1
HDMI Sink Output Port 1
Source Port Connector Standard 19 pin HDMI