ZENEC ZE-NES14 User Manual

Manual is about: 1-DIN DVD-NAVICEIVER WITH MOTORIZED 17.8cm /7" LCD DISPLAY

Summary of ZE-NES14

  • Page 1

    1-din dvd-naviceiver with motorized 17.8cm /7" lcd display model n0: user manual english · french · german.

  • Page 2

    2 contents before using start code ............................................................................................................................................................. 06 front panel ...............................................................................................

  • Page 3

    Ze-nc514 3 usb mode select usb as playing source .......................................................................................................................24 touch screen controls ..............................................................................................................

  • Page 4

    4 warnings 1. Only connect this unit to a 12v dc power supply with negative grounding. 2. Never install this unit where the operation for safe driving is restrained. 3. Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce th...

  • Page 5

    Ze-nc514 5 precautions 1. Never disassemble or a djust the unit without any professional guide. For details, please consult an authorized zenec dealer for inquiry. 2. Lf the front panel or tft monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a r...

  • Page 6

    6 before using start code: 012345 (description: page 35) front panel 14 av-in 1. [wide] key: change display mode 2. [ ] key: next/move cursor to the right 3. [ ] key: previous/move cursor to the left 4. [nav] key: enter/exit nav source 5. [vol] knob: adjust volume/active/deactive mute function 6. [r...

  • Page 7

    Ze-nc514 7 before using 10. [ ] key: eject disc 11. [open/close] key: open/close the tft monitor 12. [as/tilt+] key: auto save/preview scan/increase display angle 13. [band/tilt-] key: change radio band/decrease display angle 14. Auxiliary lcd 1. Disc indicator ■ light up when one disc is inside; li...

  • Page 8: Remote  Control

    8 before using remote control lntroduce of key functions b e f o r e u s i n g 1.[src]key:select playing source 2.[eject]key: eject disc 3.[menu] key: dvd menu / pbc 4.[title] key: dvd title 5.[disp] key: display information 6.[angle] key: select view angle 7.[wide] key: change display mode 8.[open/...

  • Page 9

    Ze-nc514 9 before using notes for remote control use 1. Aim the remote control at the remote sensor on the unit. 2. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer. 3. Do not store the remote control under direct sunligh...

  • Page 10

    10 basic operations power on/off ■ press any key on the front panel or the [power] key on the remote control to turn on the power under standby mode. The unit goes back to the last status after power on. ■ press and hold the [src] key on the front panel or press the [power] key on the the remote con...

  • Page 11

    Ze-nc514 11 basic operations display system time ■ press and hold the [disp] key on the front panel to switch the display information between system time and playing source when the tft monitor is closed. Using the tft monitor open/close monitor ■ press the [open/close] key on the front panel or rem...

  • Page 12

    12 radio mode select radio as playing source ■ open the source menu and then touch the radlo icon. Select one radio band ■ press the [band] key on the display panel or on the remote control or touch the [band] icon on the user interface to select one radio band among fm1, fm2, fm3, am1 and am2. Auto...

  • Page 13

    Ze-nc514 13 radio mode manual save when one expected radio station has been detected ... 1. Press the [mem] icon on the user interface and the preset menu will be opened. 2. Press one preset button among p1~p6. 3. Lf you want to abort, press the [exit] button. Preview scan ■ preview scan searching i...

  • Page 14

    14 rds operations the unit provides basic functions of rds, including pl (program ldentification), radio station name, rt (radio text), ct (clock time), af (alternative frequency), ta (traffic announcement) and pty (program type) selection. Af function ■ alternative frequencies lists are used for th...

  • Page 15

    Ze-nc514 15 rds operations pty function ■ pty is the abbreviation for program type which is a code defining the type of program being broadcasted (e.G. News or rock). ■ six pty options will display on the screen. To view more pty options, touch the scroll bar and arrows on the screen. ■ when one pty...

  • Page 16: Disc  Mode

    16 disc mode insert a disc ■ upon inserting a disc, the unit will switch to disc mode automatically. Notes: ■ please confirm whether there is a disc in the unit before you insert another one. ■ some recorded discs, such as cd-r, cd-rw, dvd-r, dvd+r, dvd-rw, dvd+rw cannot be played back because of di...

  • Page 17

    Ze-nc514 17 disc mode onscreen control buttons disc type/ icon mp3/wma cd vcd dvd mpeg picture s numeric keypad numeric keypad numeric keypad numeric keypad numeric keypad numeric keypad n setup menu setup menu setup menu setup menu setup menu setup menu / fast forward fast forward fast forward fast...

  • Page 18

    18 disc mode suspend playback ■ press the [/] key on the front panel or remote control or open the onscreen control buttons menu and then touch the [/] button. To resume normal playback, repeat the above operation. Stop playback ■ to stop playback, press the [] key on the remote control or open...

  • Page 19

    Ze-nc514 19 disc mode repeat playback ■ press the [rpt] key on the remote control repeatedly or open the onscreen control buttons menu and then touch the [ ] button repeatedly to alter repeat mode according to the following table. Disc type repeat mode dvd repeat chapter → repeat title → repeat off ...

  • Page 20

    20 disc mode intro playback ■ when this function is on, the unit will play back the first 10 seconds of each track of a vcd or cd disc. You can search the file you desired using this function. ■ press the [scn] key on the remote control to activate this function. Do the above operation again to canc...

  • Page 21

    Ze-nc514 21 disc mode dvd menu and tltle ■ this function is only available for the dvd discs having "menu/tltle". Press the [menu] key on the remote control or open the onscreen control buttons menu and then touch the [menu] button to open dvd menu. You can select audio language, subtitle language a...

  • Page 22

    22 disc mode notes: ■ when pbc is on, playback goes back to the track list and starts from the first track. ■ when pbc is on, fast motion playback, slow motion playback or skip search is available but repeat playback and searching for a particular chapter or track is prohibited. ■ if you do the oper...

  • Page 23

    Ze-nc514 23 disc mode for vcd 1. Disc type. 2. Pbc function indicator. "pbc on" indicates that pbc function has been activated. 3. Vcd track information. "6/18" indicates that this vcd has 18 tracks and the track playing back now is the sixth title. 4. Elapsed time of the current track..

  • Page 24

    24 usb mode select usb as playing source ■ open the source menu and then touch the usb icon. Notes: ■ the unit switches to usb mode once an usb device has been inserted. ■ the unit supports hot swap. ■ usb storage devices formatted with fat 16/32 are supported by this player, but not ntfs format. To...

  • Page 25

    Ze-nc514 25 usb mode change folder ■ the operation is the same as disc mode. Repeat playback ■ the operation is the same as disc mode. Random playback ■ the operation is the same as disc mode. Intro playback ■ the operation is the same as disc mode. Direct search ■ the operation is the same as disc ...

  • Page 26

    26 ipod mode select ipod as playing source ■ the unit will switch to ipod mode automatically when an ipod player is plugged into the unit. ■ to return to the ipod mode from any other sources, open the source menu and then touch ipod. Music playback 1. Enter ipod music mode ■ press the [tltle] key on...

  • Page 27

    Ze-nc514 27 ipod mode video playback 1. Enter ipod video mode ■ press the [audio] key on the remote control or touch the video icon on the user interface. 2. Control video files playback ■ use the keys on your ipod player to control playback. Notes: ■ to exit video mode, press the [menu] button on t...

  • Page 28

    28 dvb-t mode select dvb-t as playing source ■ open the sourge menu and then select dvb-t, and touch the screen to pop up control menu. ■ press the [] button to increase volume or press the [] button to decrease volume. Touch screen controls ■ the touch key areas for dvb-t mode are outlined below: a...

  • Page 29

    Ze-nc514 29 other modes av-in ■ external peripheral devices with rca audio and video outputs can be connected with the unit. ■ to enter av-ln mode, open the source menu and then touch av-ln. Camera ■ this player is "camera ready". Before accessing any camera features, you must purchase and install a...

  • Page 30

    30 setup setup procedures 1. Enter setup mode ■ press the [setup] key on the remote control or touch the setup icon [ ] on the user interface. ■ the following menu appears after entering the setup mode. ■ the general sub-menu is highlighted by default. 2. Select one sub-menu ■ press the direction ke...

  • Page 31

    Ze-nc514 31 setup general ■ clock mode 12 hr: the clock displays in the type of 12 hours such as 11:18 am. 24 hr: the clock displays in the type of 24 hours such as 20:18. ■ clock adjust the clock displayed on the top right corner of the tft screen. ■ tuner region the unit supports several radio sys...

  • Page 32

    32 setup audio ■ drc set the dynamic range of dolby digital dvd discs. On: playback more dynamic audio with bass. Off: normal output. ■ loudness on: loud mode is on. Off: loud mode is off. ■ subwoofer on: open the subwoofer speaker. Off: close the subwoofer speaker. ■ sub filter you can get differen...

  • Page 33

    Ze-nc514 33 setup you should set a new password asap. Method of changing password: 1. Locate the cursor on the 'password' option, press the numeric keys on the remote control or touch the 'password' option directly to open the onscreen keypad, touch the numeric buttons to enter your password (origin...

  • Page 34

    34 setup 3. Close the parental lock ■ repeat the operation of the first step to enter a 6-digit password (old or new) and then confirm. ■ the parental lock is closed. ■ load factory to restore the default settings relating with dvd playback (e.G.: dvd audio, dvd subtitle), press the [reset] option. ...

  • Page 35

    Ze-nc514 35 setup ■ source select one playing source that you want to set relative volume. ■ level you can set relative volume level from 0 to 6. Method of changing passwort 1. Locate the cursor on the “anti-psw” option, press the numeric keys on the remote control or touch the “anti-psw” option dir...

  • Page 36

    36 eq ■ audio control allows you to easily adjust the audio system to get the best possible sound effect. 1. Enter the eq setup mode ■ press the [sel] key on the remote control or touch the eq icon in the user interface and the following interface will display on the screen. 2. Select eq mode ■ touc...

  • Page 37

    Ze-nc514 37 troubleshooting ■ what appears to be trouble is not always serious. Please check the following points before calling a service center. Problem cause corrective action general unit can not power on. Unit fuse blown. Lnstall new fuse with correct rating. Car battery fuse blown. Lnstall new...

  • Page 38

    38 troubleshooting (continued) problem cause corrective action disc playback cannot insert disc. A disc inside the unit already. Eject current disc and insert new one. Disc does not play back. Disc is warped or scratched. Use disc in good condition. Disc is dirty or wet. Clean disc with soft cloth. ...

  • Page 39

    Ze-nc514 39 device connections notes of connection ■ this unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a mobile home, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install...

  • Page 40

    40 device connections control cables auto brightness control ■ to avoid the display being too bright at night time, if the headlight cable is connected to llluml, turning on the head light will dim the backlight of the tft lcd and vice versa. Telephone mute ■ lf the mute cable is connected to a car ...

  • Page 41

    Ze-nc514 41 device connections parking brake cable connections reverse driving cable connections gearbox.

  • Page 42

    42 installation and uninstallation notes of installation 1. Before installation, please make sure proper connections are conducted and the unit operates normally. Lmproper connection may result in damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthori...

  • Page 43

    Ze-nc514 43 installation and uninstallation (picture 2) 4. Lnsert the unit into the bracket, fasten the m4 x 6 screw to the fireproofing board available at the back of the dashboard, and use 4 pieces of m2 x 2 screw to lock the assemble bars and the mounting bracket in position. Note: ■ according to...

  • Page 44

    44 installation and uninstallation trim ring installation ■ attach the trim ring around the front panel with two indentions on one side facing upwards. Uninstall disassemble trim ring 1. Push the trim ring upward and pull out the upper part. 2. Push the trim ring downward and pull out the lower part...

  • Page 45

    Ze-nc514 45 specifications general reference supply voltage ....................................................................................... 12v (dc) operating voltage range ............................................................................ 10.5~15.8v (dc) max operation current .......

  • Page 46

    46 ■ if at any time in the future you should need to dispose this product please note that waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice (waste electrical and electroni...

  • Page 47

    Ze-nc514 47 appendix region code according to dvd sale region, the whole world is divided into six regions. A dvd disc can be played back only when its region code is compatible with that of the player in use. Region 1: usa, canada, east pacific ocean lslands; region 2: japan, west europe, north eur...

  • Page 48

    48 appendix wiring connections.

  • Page 49

    Ze-nc514 49 2 years limited warranty dear customer thank you for purchasing this zenec product. It is advisable to keep the original packing material for any future transporting of the product. Should your zenec product require warranty service, please return it to the retailer from whom it was purc...

  • Page 50

    Zenec by acr ag · bohrturmweg 1 · bad zurzach · switzerland.