Instruction manual electric brush cutter bc-1400
3 general safety precautions warning! When using electric tools, basic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For sa...
4 switch. Ensure switch is off when plugging in. 18. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor use. 19. Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired. 20. Check damaged parts. Before further...
5 5. Follow instruction on blades operation and installation. 6. Blade thrust may occur when the spinning blade contacts a solid object. Blade thrust may lead to serious injury. Keep others including children, animals, bystanders and helpers outside the 15 m hazard zone. If the blade thrusts from a ...
6 technical specifications model bc-1400 rated power 1400 w rated voltage 220-240 v rated frequency 50-60 hz max speed 10000 rpm net weight/gross weight 4,0/5,0 kg standard accessories attachment connector 1 harness 1 3-blade metal blade 1 trimmer head (2 nylon lines) 1 set of wrenches 1 all data su...
7 4. Blade guard installation install the guard bracket on the gear case with the help of three mounting screws. Install the blade guard on the bracket with the help of three mounting screws. 5. Cutting head installation. Install the guard bracket on the gear case. Align the hole in the faceplate wi...
8 cutting with nylon line always install blade guard when cutting with nylon line. Always use blade guard with trimming blade when cutting with nylon line. In order to avoid the tool overheating it is recommended to remove cut grass from the brush cutter regularly. Often grass winds around the drive...
9 do not use serrate blades with this tool attention! Do not trim with blunt or damaged blade. Inspect the area to be cut before each use. Remove objects which can be thrown or become entangled. Attention! Wear the harness. Adjust harness to lift cutting mechanism on several dozens of mil- limeters ...
10
11.
Demix llc head office: 14, shevchenko str., 3rd floor dnepropetrovsk, ukraine, 49044 tel./fax: +38 056 375-43-16 http://www.En.Zenit-profi.Com.
