10-8 Video Digital Evidence Solutions 10-8 Body Camera User Manual - Important!
8
9
IMPORTANT!
READ THIS FIRST
BeforeusingyournewBC-1BodyCameraforthefirsttime,we
recommendperformingthefollowingstepstomaximizetheusabilityof
yournewBC-1BodyCamera.
Body Camera Setup
1. ChargetheBC-1BodyCamerausingthe120Volt,12VoltorUSB
cable.
See
Charging the Battery
sectionfordetails.
2. DownloadandinstalltheBC-1BodyCamerasoftwarefromthe10-8
VideoWebsite:
http://www.10-8video.com/support/downloads/
3. Ifthesoftwareisnotalreadyrunning,launchtheBC-1BodyCamera
software.
4. Entertheusernameandpasswordtologintothesoftware.
5. PlugtheincludedUSBcableintoyourcomputer,thenplugtheother
endofthecableintotheBC-1BodyCamera.
6. TheBC-1BodyCamerawillautomaticallysynchronizeitsinternal
clocktothedateandtimeonthecomputertowhichitisconnected.
7. TheLCDDisplayontheBC-1BodyCamerawilldisplayfour(4)
asterisks(*)indicatingitiswaitingforyoutoenterthepassword
toaccesstheinternalsofthedevice.The default password for the
camera is 0000-fourzeros.
8. UsetheBC-1BodyCameratosettheproperbadgenumberforthe
officerwhoistousethecamera.TheBC-1Softwareallowsyoutoset
boththeunitanduserIDforeachunitused.Thisinformationwill
displayoneveryvideoalongwiththedateandtime.
9. Wealsorecommendchangingthepasswordatthispoint.
If you connect the BC-1 Body Camera to a computer and do not
enter the proper password, it will only charge its battery and you
cannot access the camera’s internal files.
For maximum security of your files, we recommend changing the
default password after setting up the BC-1 Body Camera for the
first time.
Default Login:
User: 0000
Password: 000
Note: You can also press the Play button four (4) times to
advance through the password screen without having to
change the password.
First-Time Usage
First-Time Usage