Summary of V680
Page 1
1 0 0 1 e s p i o n s .Com 1 v680 gps watch user’s manual.
Page 2
1 0 0 1 e s p i o n s .Com 2 table of contents chapter i preface……………………………………………………..4 i．general……………………………………………………………...4 ii．notices……………………………………………………………..4 chapter ii about the device………………………………………….5 1. Appearance…………………………………………………………..5 2. Product features…………………………………………………….5 3. Product ...
Page 3
1 0 0 1 e s p i o n s .Com 3 chapter iv commands corresponding to and operation method of basic functions…………………………………….11 1. Location inquiry………………………………………………….12 (1) sms inquiry……………………………………………………12 (2) platform inquiry………………………………………………..13 2. Setup of centre number………………………………………….13 3. Bi-dir...
Page 4: Chapter I Preface
1 0 0 1 e s p i o n s .Com 4 (1). Gps fence function…………………………………………...20 (2). Fence reading function……………………………………….20 (3). Function of canceling fence…………………………………..21 15. Auxiliary functions………………………………………………21 notices…………………………………………………………………..22 chapter i preface i. General v680 represents the ...
Page 5
1 0 0 1 e s p i o n s .Com 5 2. This user‟s manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail. 3. The defaulted password of this product is 0000. Chapter ii about the device v680, as a personal remote positi...
Page 6
1 0 0 1 e s p i o n s .Com 6 2 product features ● inbuilt gps module ● internet positioning service center, used to receive and send positioning information ● gsm /gprs modem supports quad frequency bands, i.E. 850/900/1800/1900 mhz ● high-sensitivity, new workmanship and the most advanced gps chip ...
Page 7
1 0 0 1 e s p i o n s .Com 7 gps sensitivity -163dbm gps center frequency l1, 1575.42mhz gps positioning accuracy 5-25m gsm positioning accuracy 100-500m speed accuracy 0.1 m/s time accuracy synchronous with gps gps datum wgs-84 hot start warm start max. Altitude 18000m max. Speed 515m/s gravitation...
Page 8
1 0 0 1 e s p i o n s .Com 8 power supply dc5v standby time >48h buttons sos button for emergency aid; call 1, call 2, switch on / off buttons, interface switch button chapter iii usage preparation i. Accessories 1. Main unit 2. Usb data cable 3. Charger 4. Headset cable (optional) 5 battery ii. App...
Page 9
1 0 0 1 e s p i o n s .Com 9 2. Interface definition gsm signal strength is indicated on the upper left corner of the main interface as showed in picture 2: bottom left button is for interface switch as showed in picture 3: iii. Charge the battery please use up the battery and discharge it for 2-3...
Page 10
1 0 0 1 e s p i o n s .Com 10 put the battery into the inside of the terminal and connect the charger to 100v/220v ac power supply to charge the battery. Then the power indicator on the upper right corner of the terminal screen will keep strolling as showed in picture 3-1: ( picture 3-1 ) when t...
Page 11: Method Of Basic Functions
1 0 0 1 e s p i o n s .Com 11 the battery may vary due to difference of internet service, functional mode and usage mode. disconnect the terminal and charger as soon as possible after the battery is well charged. Iv. Installation of sim card open the back cover, then you will see the place where t...
Page 12
1 0 0 1 e s p i o n s .Com 12 1. Location inquiry (1) sms inquiry create 988 + password command (defaulted password as 0000) via mobile phone and send it to the terminal mobile phone number; after successful sending, the guardian‟s mobile phone will receive a piece of message. See the flow as follow...
Page 13
1 0 0 1 e s p i o n s .Com 13 the terminal will return a piece of detailed latitude and longitude message. (2) platform inquiry step 1: log onto the platform (please contact with the service provider to get the platform address). Step 2: click the terminal of the ward, then the location of the ward ...
Page 14
1 0 0 1 e s p i o n s .Com 14 electronic fence, etc will be returned to that number. 3. Bi-directional call function incoming calls can be rejected by pressing upper left button or received by pressing middle right button. Send the command in form of sms to the terminal via mobile phone. After the s...
Page 15
1 0 0 1 e s p i o n s .Com 15 5. Sos function if a ward number (predetermined number in item3) is set, when the ward encounters emergency and presses the sos button, the terminal will send alarming information to the center number and dial the three ward numbers in turn. Picture 5 is sos alarming in...
Page 16
1 0 0 1 e s p i o n s .Com 16 surroundings within 10m around the ward. Sms format: 5550000 remarks: 0000 is the initial defaulted password and in practice the password could be set by the user. 7. Regular upload interval setup the defaulted upload interval of this product is 0, meaning that the defa...
Page 17
1 0 0 1 e s p i o n s .Com 17 phone with such setup will receive one piece of „&770&successful setting&&‟ response information or „&770&password er&&‟ if the password is wrong, as shown in the following picture: ① send command to the terminal. ② the terminal return confirmation message to the mobile...
Page 18
1 0 0 1 e s p i o n s .Com 18 10. Set apn command create the sms “802#apn letters or digits, 4-20 bits # log user name letters or digits 4-20 bits in # log password letter or digits 4-20 bits in # terminal password 4 bits ##” and send it to the terminal; after executing this command, the terminal wi...
Page 19
1 0 0 1 e s p i o n s .Com 19 setup via domain name: example: #803#gps.Chinaradio.Hk#9876#0000## 12. Low-voltage alarming function if the terminal of the ward has a very low power and needs to be powered off, the terminal of the ward will automatically upload one piece of low-voltage alarming comman...
Page 20
1 0 0 1 e s p i o n s .Com 20 when satellite time is corrected to gmt automatically, send sms command 8960000e08 and the time will change into beijing time. 14. Electronic fence function (1)gps fence function the guardian could get the center spot of a fence through google map or single inquiry. Set...
Page 21
1 0 0 1 e s p i o n s .Com 21 (2) fence reading function send commands to the terminal: # command number (752) # user password 4 digits ##; after the command is set successfully, the terminal will read the data of the module fence working status and return message to the sending mobile phone, or pas...
Page 22
1 0 0 1 e s p i o n s .Com 22 (3) function of canceling fence command name: # command number (760) # user password 4-digits ## example: #760#0000## after the terminal receiving this command, all fence settings will be cancelled. Advice: do not set gsm fence and gps fence at the same time. 15. Auxili...
Page 23
1 0 0 1 e s p i o n s .Com 23 5. This device supports the dual positioning mode of gps and gsm/gprs. 6. Please use this device in a legal area, any illegal consequence will be borne by the user. Notes: due to the high sensitivity of the gps module adopted by this product, it is normal to be drifting...