10Bar GF1 User Manual - 3. Function Controls
2
Accessories
Spare main O-rings ( included)
Silicone O-ring grease ( included)
Carrying bag ( included)
Red filter (optional)
Extension arm for strobe or video light (optional)
Macro and Wide Angle lens (optional)
3. Function Controls
3.1 Buttons & Parts
(1) Flash off
(2) Bulkhead
(3) Drive Mode Lever
(4) Mode dial
(5) On / Off
(6) Motion picture button
(7) Shutter
(8) Key hole lock
(9) Flash on
(10) Playback / [AF/AE LOCK]
(11) Real dial
(12) [AF/MF] / [Q.MENU]
(13) Cursor
(14) [MENU / SET]
(15) Display / Delete / Preview
(16) Housing lid
(17) Zoom ring
(18) [O.I.S.] Switch
(19) Focus ring
3.2 Control Details
(1) Flash off
–
press the lever down to turn off the flash. Make sure that the Flash is turn off
before remove the camera from the housing.
(2) Bulkhead
–
for connecting sync cord, unscrew the blank plug and install the sync cord.
Always keep the blank plug in place if sync cord is not installed.
(3) Drive mode lever
– turn the button to select Single / Burst / Auto bracket / Self-timer.
Important - make sure the white dot on the control button align with the white dot on the Drive