10ZiG Technology Limited RBT-402 Quick Start Manual

Page of 2

Download

Bookmark us

Phone: 866-864-5250

Fax: 623-516-8697

E-mail: support@10zig.com

2012 West Lone Cactus Dr.

Phoenix, Arizona 85027

10ZiG Technology (Europe)

Phone: +44 1509 276252

Fax: +44 1509 276253

Email: support@10zig.eu

Setting up Connections

RBT-402 supports the following communication protocols (connections):

TN5250e Connections (Display and Printer) for direct link-ups to AS/400

systems via Ethernet cable and TCP/IP protocol.

TN3270e Connections (Display and Printer) for direct link-ups to IBM 390

systems via Ethernet cable and TCP/IP protocol.

ICA Connections (Independent Computer Architecture) by Citrix

RDP Connections (Remote Desktop Protocol) Microsoft Terminal Server

HTTP Connections through the FireFox browser.

If running in WBT mode, configuring the various sessions (connections) takes place

through the main The “Terminal Connection Manager” window appears each time

the terminal is turned on, if there are no sessions set to auto start. If is session is

currently running you will need to use the key combination of CTRL+ALT+END to

enable the Terminal connection manager.

If running in Desktop mode you will need to go to Start, Settings, Connection

Manager.

From this window it is possible to configure, modify, add, cancel and enable

sessions.

Page 1
Phone: 866-864-5250 fax: 623-516-8697 e-mail: support@10zig.Com 2012 west lone cactus dr. Phoenix, arizona 85027 10zig technology (europe) phone: +44 1509 276252 fax: +44 1509 276253 email: support@10zig.Eu setting up connections rbt-402 supports the following communication protocols (connections): ...
Page 2
Rbt-402 initial configuration wizard the first time the unit is powered on, you will be presented with a startup wizard. This will create the initial settings for display and network. Setting a static ip address and wireless should you need to set a static ip address do the following; 1. Click start...