Dt24 user manual(en) 2-wire video intercom system read this manual carefully before using the product, and keep it well for future use..
Introduction the monitor is designed with 4 inch screen, it provides a resolution of 320x240 pixels with high quality image display, and it equipped with a handset to com- municate. The touch sensitive button makes the operation more easily. Parts and function microphone mounting hook lcd screen han...
Unit mounting accessory contents: accessories include a bracket, two 4x25 screws (use to fasten the mounting bracket), 2 wire connectors (use to connect with monitor). Installation steps: installation height for indoor monitor usually is 145~160cm(refer to sketch map). Wire the cable correctly(see t...
• pick up handset to talk with the visitor, the talking duration time is 90s. To end the conversation, please hand up the handset. If the system connects two or more monitors, pick up any monitor, the others will be automatically shut off. Door release during talking state, press unlock button to op...
Swers the call, conversation is started.And the other monitors will stop ringing at the same time. (note:the user code of all monitors must be same.) direct call guard unit: a monitor can be assigned as guard unit monitor; when the guard unit monitor answers the call, conversation with the guard per...
• the first item is scene mode selection: total 4 screen modes can be select- ed in sequence: normal, user, soft and bright. Please note whenever you modify brightness or colour item, scene item will be set to user mode automatically. • the brightness and colour item is for the image quality setting...
How to set the monitor as a guard monitor a monitor can be assigned as guard unit monitor; when the guard unit moni - tor answers the call, conversation with the guard person is started.. The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this funct...
2 locks control: the monitor can be set to control 2 locks while you should set the unlock2 item to “on “ state. The code number of 8015 is used to set the unlock2 off that it can only control one lock. The code number of 8014 is used to set the unlock2 on that it can control two locks. Note:1. Duri...
Note: 1.The monitor can only support 4 languages. English,french,spanish and german are default.But you can customize any 4 languages by yourself. 2. We reserve the copyright to add languages without notice to users. How to set the address for monitor each monitor should be assigned an address in th...
Specification: 1) all components should be protected from violence vibration. And not allow to be impacted, knocked and dropped. 2) please do the cleanness with soft cotton cloth, please do not use the or- ganic impregnant or chemical clean agent. If necessary, please use a little pure water or dilu...
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. Dt-eng-dt24-v1 p120924.
