2easy DT692 User Manual
1. Parts and Functions
CALL
UNLOCK
TALK/MON
IN-USE
LCD Touch Screen
LED indicator
UNLOCK button
CALL button
TALK/MON button
Speaker
Connection Port
Ventilation Vent
Mounting Hook
Mounting Hook
Microphone
1 2 3 4 5 6
ON
DIPS
L1
BT1
BT2
EH
GND
VD
L2
Dimensions: 155(H)×225(W)×28(D)
2. Operation Instructions
2.1 Basic Video Door Phone Functions
1. When visitor presses the Call
Button on the Outdoor Station,
the monitor rings, at the same
time, the screen displays the
visitor image, and IN-USE LED
turns to red.
2. Press TALK/MON Button(or touch
TALK
icon on the screen), you
can talk with the visitor for 90 seconds. During talking state, press
TALK/MON Button (or touch
EXIT
) to end the conversation. If
nobody answers the phone, the screen will be turned off automatically
after 30 seconds.
3. When Monitor is in standby, press TALK/MON Button(or touch
anywhere on the screen, then touch
monitor
), the screen will display
the view of the Outdoor Station. During monitoring state, press the
2.2 Intercom function
1. During the standby, press
CALL Button to enter Intercom
Function page.
2.
Intercom Call
: calling other
apartments in the system.
Press the item to enter the
Name List
page. (the name list
will be created automatically by
the system). Selete a name on
the screen then press
icon
to call. Use
/
icon to
scroll to Last / Next name list
page.
3.
Inner Call
: If multi Monitors are installed in the same apartment, select
Inner Call all the other Monitors will ring at the same time, whichever
Monitor answers the call, conversation is started.
4.
Direct Dial Guard unit
: A Monitor can be assigned as Guard Unit
Monitor; when the Guard Unit Monitor answers the call, conversation
with the guard person is started..
H o m e I n t e l l ig e n t S y s t e m
Intercom Function
Intercom Call
Inner Call
Direct Call Guard Unit
Exit
H o m e I n t e l l ig e n t S y s t e m
- Name List -
[01] Mr A
[02] Mr B
[03] Mr C
[04] Mr D
[05] Mr E
1
2
3
4
or
icon to get into the
Auto-switching mode, if multi
Door Stations are installed, the
monitor will switch the camera
automatically. you can press
the
1/2/3/4 to monitor the
specific Door Station or CCTV
camera.
4. During the monitoring, press UNLOCK Button(or touch
) to
release the Electronic Lock,press the CALL Button(or touch
rec
) to
record the current picture. Touch
will show the creen settings.
5. Touch the
icon will hide all the icons on the screen, touch
anywhere on the screen again, the icons will showed up.
2 wire intercom system
DT692 user manual
Page 1/2
DT-ENG-692-V1