2gig Technologies 2GIG-NVR1 Installation Instructions Manual

 2GIG-NVR1

NETWORK VIDEO RECORDER (NVR)                                              

INSTALLATION INSTRUCTIONS

Contents

Verify that the package includes the following:

•  1—2GIG Network Video Recorder Module (NVR)

•  1—Plug-in Power Adapter (120VAC)

• 1—3”CD

• 1—Paper Moun  ng Template Guide 

•  1— USB Mouse Controller  

•  1— 1 Terabyte Single Hard Disk Drive

•  4—1-1/2" Phillips Screws and anchors

•  4—1/4" Phillips Screws (for moun  ng hard drive to NVR cover)

•  1—Removable Terminal Block (to connect alarm input/output)            

Figure 1. Network Video Recorder (NVR) Contents                                                                                                     

InstallaƟ on Tools Required

•  Phillips Screw Driver

•  Variable Speed Electric Drill

•  Level (for wall moun  ng of NVR module)

Hard Drive Installation into NVR

1. 

Remove the two screws on the bo  om of the Network Video Recorder 

housing.

Figure 2. Hard Disk Cover Removal

2. 

Pry up the hard disk cover to expose wiring harness for harddisk connec  on.

3. 

Fix the hard disk to the hard disk cover using 4  1/4" Phillips screws (Provided 

with NVR).

Figure 3. Fixing Hard Disk to NVR Hard Disk Cover

 Figure 4. Placing Hard Disk/NVR cover into NVR case bo  om.

4. 

Plug wiring harness to the hard drive terminals, then seat hard drive with 

cover down into NVR case.

Figure 5. Plugging in Hard Drive

A

A

A

A

TOP

Use holes marked with 

“A”

when installing (1.4 inc

h length) scre

ws.

HARD DRIVE COVER

HARD DRIVE

 WIRING 

 HARNESS

PLUG 

CONNECTOR

HARD DRIVE