2HEAT MRF Series User Manual - Preface

Summary of MRF Series

  • Page 1

    Users manual thank you very much for choosing our product and services as well as your trust and support to us.

  • Page 2: Preface

    Preface >1 this product has the following characteristics: conformity with standard conformity with the european decree 1. Easy operation: one function knob and three push buttons 2. Weekly 3. Two kinds of program selections with permanent memory: ex-work preset program and program set by the custom...

  • Page 3: Display Screen Symbols

    >2 display screen symbols a b c d e f g h i= j k l q n o p m = present ambient temperature = comfort temperature = economic temperature = freeze-proofing temperature = present time = working state = 7days display in a week, and the present day display is in the square frame. = running symbol of the ...

  • Page 4: Product Specifications

    >3 product specifications power supply: two lr6 type1.5v alkaline batteries, service life more than one year. Temperature adjustment range: 4 35 ambient temperature displayed on the screen: 0 40 temperature test frequency: once/min. Display accuracy 0.5 probe ntc 3% protection degree ip20 thermal gr...

  • Page 5: Application...

    >4 application... Program presetting when out of factory: from monday to friday saturday and sunday 00:00-----06:00 economic temperature 06:00-----08:00 comfort temperature 08:00-----18:00 antifreeze temperature; 18:00-----22:00 comfort temperature 22:00-----24:00 economic temperature 00:00-----06:0...

  • Page 6: Setting

    1. Setting of date and time: set present date (which weekday), hour and minute. A. Set the function change-over switch to position, the screen mode display area will display hour icon. B. When the frame displaying the present date starts flashing, press key or key to adjust the present weekday, and ...

  • Page 7: Setting...

    >6 3 setting of self-established program set 7-days self-established program as well as the control temperature for each period. Copy the program for one day 、 : , ; , , , ; ; : ( ) , ; , , , 。 , , a. Set the function change-over switch to position and screen appearance display area shows the progra...

  • Page 8: Setting...

    >7 setting... 4. Temporary temperature change: at "automatic" mode it can temporarily change the temperature at a given program period. You have set the program already the comfort temperature is 20 between 9:00~ 18:00, but you want to lower the temperature to 18 at 10:00 then you set the temperatur...

  • Page 9: Attention For Installation

    1. The internal temperature controller should be installed away from the direct sunlight or the position directly influenced by other cold and heat sources. The installation height should be approximately 1.5 m off the floor. 2. Only the professionals can open the receiver box of the chronothermosta...

  • Page 10: Installation Examples

    >9 installation examples 12 3 19 8 3.5 60 fig.2 fig.3 fig.4: rf model fig.5: ww m odel ac 220 ~ 2 1 3 1 2 l n l n ac 220~.

  • Page 11: >10

    >10 installation examples fig.6: rf model fig.7: mrf model ac 220~ u ac 220~ u1 u2 u3 u4 1 2 l n l n ac 220~ u.