Summary of StarPoint 500
Page 1
2n omega 48 2n starpoint 500 user‘s manual 2n starpoint 500 version 2.0
Page 2: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 2 www.2n.Cz dear customer, congratulations on the purchase of the product 2n starpoint 500. This new product was developed and manufactured with an emphasis on maximum user value, quality and reliability. It is our desire that the 2n starpoint 500 should gi...
Page 3: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 3 www.2n.Cz contents 1. Introduction ................................................................................................................... 4 1.1 content of the package...............................................................................
Page 4: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 4 www.2n.Cz 1. Introduction 2n starpoint 500 telephone sets are digital system telephones. The sets (except for 2n starpoint 500 entry) feature a two-row display, programmable buttons, loudspeaker function (hands-free), and the option of additional accessor...
Page 5: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 5 www.2n.Cz connect the receiver to the telephone set using the twisted cable (from the bottom – see the figure below) connect the telephone set to your telephone socket using the telephone cord supplied. Note: the 2n starpoint 500 telephone can only be con...
Page 6: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 6 www.2n.Cz assistant console (key module): operator console (blf module) connecting the button console to the telephone (see the figure below): attach the console to the telephone set. Use the connecting cable to connect the telephone with the console conn...
Page 7: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 7 www.2n.Cz 1.4 telephone description you can browse the telephone menus and the telephone lists using the “forward” and “back” buttons. The select button is used to select the specific function. The “+” and “-“ buttons are used to change the volume of the ...
Page 8: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 8 www.2n.Cz telephone display all 2n starpoint 500 telephones (except for the entry model) are equipped with a two-row display. The display contract can be adjusted. For description of the display parameter setup refer to chapter. Default display status: fo...
Page 9: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 9 www.2n.Cz conf (connecting a call to a conference) park (parking the call during a call, when idle locking of the telephone set) escape (back in the menu, rejecting a call) overview of calls indicators of the buttons set to quick-dialing internal numbers ...
Page 10: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 10 www.2n.Cz the time of the call will be displayed when the called party answers the call: if the called party is busy you will hear the busy tone and the following message will appear on the display: you can also dial the number first, and then start the ...
Page 11: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 11 www.2n.Cz you can set the programmable buttons for so-called one-touch dialing of frequently called numbers. You can then dial the telephone number by pressing a single button. For one-touch dialing setup see chapter programmable buttons setup. The telep...
Page 12: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 12 www.2n.Cz 2.2. Incoming calls an incoming call is indicated on the telephone display by the caller’s name, telephone number. The names are displayed for the numbers according to your personal telephone book, or according to the telephone book assigned by...
Page 13: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 13 www.2n.Cz press the hands-free button to switch to the hands-free mode (the hands-free button indicator lights up); turn the hands-free mode by pressing the button one more time. To turn off the microphone temporarily during a call (if you do not want th...
Page 14: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 14 www.2n.Cz.
Page 15: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 15 www.2n.Cz 3. I would like to... This chapter provides instructions how to solve standard situations. 3.1. Set the programmable buttons the programmable buttons on your telephone can be set up by the pbx configuration tool. Your system administrator will ...
Page 16: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 16 www.2n.Cz missed 3.2. Respond to missed calls situation: the telephone signals missed calls, you want to respond to these calls what to do: if you have defined the button for accessing missed calls, press this button to access the list. Otherwise use the...
Page 17: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 17 www.2n.Cz flash flash 3) press the dnd button - the caller will be immediately redirected to the “operator”. 3.6. Turn down the ringing volume situation: your telephone is ringing, you don’t want to be disturbed by the ringing and you don’t want to answe...
Page 18: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 18 www.2n.Cz missed dialing tone in the receiver (the other hears the on-hold music in the receiver). Dial the telephone number of the party you wish to add to the conference. After the called party answers the call press the conf function button. All three...
Page 19: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 19 www.2n.Cz the list of the individual items will be displayed when you enter the respective list of calls. On the system telephone display: use the “forward” and “back” buttons to browse the individual items. Press the select button to display another sub...
Page 20: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 20 www.2n.Cz 4.2. List of missed calls the list of missed calls offers an overview of the last twenty incoming calls that were not answered. If you have a programmable button set for access to the list of missed calls the indicator of this button signals th...
Page 21: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 21 www.2n.Cz 4.6. Pbx services pbx services can be inserted and dialed using a programmable button, but also directly from the menu of the digital system telephone, 2n starpoint 500. Press the button for entering the menu the item browsing buttons to enter ...
Page 22: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 22 www.2n.Cz note: the use of the different services is described in the manual called basic services and services for the operator. 4.7. Intercom - trf intercom trf is a special type of call where a preset telephone number, “assistant”, is dialed by pressi...
Page 23: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 23 www.2n.Cz.
Page 24: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 24 www.2n.Cz 5. Telephone setup all telephone settings are conveniently accessible in the environment of pbx configuration tool. 5.1. Programmable buttons setup programmable buttons are set up in the environment of pbx configuration tool/system lines/button...
Page 25: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 25 www.2n.Cz.
Page 26: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 26 www.2n.Cz if you want to assign a function (hands-free, transfer, mute,..), direct dialing of an internal line, or direct access to an external line to one of the programmable buttons, first left-click the programmable button you wish to set up as follow...
Page 27: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 27 www.2n.Cz this way you can set up all the programmable buttons you want. The following will be displayed when right-clicking the mouse button: - default set, default settings of the programmable buttons (balanced settings with respect to the individual t...
Page 28: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 28 www.2n.Cz 5.2. Description of the buttons all of the descriptions of the buttons can be formed and then printed out in the environment pbx configuration tool /system lines /buttons/prints. After filling in the functions of the individual buttons in menu ...
Page 29: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 29 www.2n.Cz for a “print preview” of the descriptions allow the printing of the individual groups of buttons and press “preview”. To “print” the descriptions allow the printing of the individual groups of buttons and press “print”..
Page 30: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 30 www.2n.Cz volume and ringtones setup 2n starpoint telephones offer the option to select from several ringtones. Assign the ringtones to the individual types of calls in the environment of pbx configuration tool/system lines/buttons/user settings. Set: -k...
Page 31: 2N Omega 48
2n omega 48 2n starpoint 500 user‘s manual 31 www.2n.Cz -external calls, type of ringing when an external line calls. -alarm clock, type of ringing if “alarm clock”. -door control/communication system, type of ringing of the door communicator, “door control/communication system”. -call return, type ...
Page 32
2n omega 48 2n starpoint 500 user‘s manual 32 www.2n.Cz 6. Important notices - the telephone is not to be operated in an explosive environment. - the telephone is to be connected only to the dedicated outlets. - the telephone may not come in contact with aggressive substances, fluids that might caus...