Copyright 2touch technologies limited 2007-2008. All rights reserved. 2touch 2150 series interactive whiteboard installation guide revised 30 november 2010 this installation guide is intended for technicians installing a 2touch board onto a flat wall. It does not include the information required to ...
Congratulations ! Congratulations on your purchase of a 2touch interactive whiteboard. We believe we have an extraordinary solution, and we are committed to ensuring that you enjoy all of the benefits it can offer. We are very proud of our product, and welcome your feedback on how we can keep improv...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Contents of this instalation manual on delivery ...................................................................................................................4 handling your 2touch board..........................................
Copyright 2touch technologies limited 2007-2008. All rights reserved. On delivery handling your 2touch board always keep your 2touch board right way up. The cameras are located at the top corners of the board. Placing the board upside down may damage or affect the camera settings. Do not store your ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Accessories for your 2touch board accompanying your 2touch board is a wall mount kit containing four aluminium angle brackets and fasteners to secure these to the wall. If you have purchased the board is part of a “ready to instal...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installation installation skills qualified technicians (“2touch certified installers”) are trained in the installation of 2touch devices, and to use specialised utilities to monitor optical performance of the unit during the insta...
Copyright 2touch technologies limited 2007-2008. All rights reserved. • concrete – wall mates + screws • timber / mdf - screws note: when applying fasteners to support projectors on the wall, be aware of the substantial turning moment imposed by the cantilever of the projector. This imposes a strong...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Optics system requires training and experience and this subject is not included in this guide. Installers wanting to become 2touch certified installers are invited to apply by email to installers@twotouch.Com . Removing your 2touc...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Without feeling impaired by furniture or other items. We suggest that the user should be able occupy a standing area on each side of the iwb being no less than 500mm wide. Height of the iwb we recommend a standard placement of the...
Copyright 2touch technologies limited 2007-2008. All rights reserved. In the following diagram, power and connector requirements are identified for these three zones. The diagram displays the combination of a 2touch iwb, the epson eb450w projector, and the 2touch 014 audio solution. Note that the wa...
Copyright 2touch technologies limited 2007-2008. All rights reserved. • usb cabling from the iwb to the powered usb hub, and from the powered usb hub to the wall panel; • calibration switch cabling from the iwb to the desired location of the calibration switch..
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installing your 2touch board on the wall before installation, usb (and calibration switch if appropriate) connectors must be reticulated to a suitable position so that they can be connected to the wiring loom once the board is in ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. 3. Connect the board to your computer. Using usbsettings software, check the camera traces. Work around the board, observing camera outputs, and ensure that board is level and flat while applying the remaining screws to secure the...
Copyright 2touch technologies limited 2007-2008. All rights reserved. 5. Usb type a cable from board into hub outlet (note additional usb extension needed if port is placed on right side of board) 6. If 2touch model 014 speakers supplied, then a usb type a male to usb type b male cable will be requi...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installing the 2touch audio (2touch model 014) 1. Position anchor posts: 67mm from edge of board; 265mm down from top edge of board. Suspend speakers on anchor posts. 2. Line up speakers to be parallel to vertical edge of board. P...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installing the calibration switch a calibration switch may be placed at the desired user location. A momentary action (momentarily closed) switch is required, preferably push button. Depending on user preferences, the following sw...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installing the epson eb450 projector with a 2touch iwb 1. Position bottom of bracket 40cm above top edge of whiteboard. 2. If image is to be placed at one edge of board, then projector bracket centreline should be 950mm from that ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Installing the 2touch modular connection system (mcs-1, mcs-2) the 2touch modular connection system (mcs) features snap-in faceplate modules which can be selected to suit a client’s requirements, plus pre-terminated cabling which ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Additional or alternative snap-in modules may be supplied to requirements from the following: 2t_mcs_blank module - blank 2t_mcs_rca1/2/3 modules with 1, 2 or 3 x rca connectors 2t_mcs_usb module with usb-b on faceplate, usb-a beh...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Final checks: the following final checks should be performed on site for every board: - camera signals are strong throughout (particularly observe signal strength at and near opposing diagonal corner, and opposing camera); - each ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Registering your 2touch interactive whiteboard 2touch certified installers are required to record the following details for every installation, into the secure 2touch tracker on-line product database: • serial number of board • cu...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Using the 2touch board switching on connect the cables and switch on power to any usb peripherals prior to connecting the usb cable to the 2touch board. Connect and power up the computer and projector. The computer then automatica...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Using your 2touch board as a mouse: upon connecting any computer to the 2touch interactive whiteboard, single touch mouse functionality is enabled instantly (without the need for any additional software). The standard mouse contro...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Caring for and cleaning your 2touch interactive whiteboard cleaning the whiteboard surface: the 2touch iwb uses a porcelain steel whiteboard surface. Porcelain on steel whiteboard surfaces deliver the best performance in terms of ...
Copyright 2touch technologies limited 2007-2008. All rights reserved. User software 2touch workbook having purchased a 2touch board, your organization is automatically entitled to a site-wide license for this powerful white-boarding software. • 2touch workbook can be downloaded from http://update.Tw...
Copyright 2touch technologies limited 2007-2008. All rights reserved. Support contacts first line of support: your first line for support is the 2touch authorised dealer which supplied your 2touch board. A complete list of all 2touch authorised dealers and their contact details is available from www...
