1. DL manuals
  2. 3BB
  3. Modem
  4. ADSL modem
  5. Instructions For Use Manual

3BB ADSL modem Instructions For Use Manual

Summary of ADSL modem

  • Page 1

    1 installation installation procedure: a install adsl router (page 1-3) b lan card setting (page 4-12) b.1 for windows xp user b.2 for windows vista user c how to use 3bb cd-rom and username/password setting (page 13-21) c.1 setting by using cd-rom c.2 setting via web page a install adsl router you ...

  • Page 2

    3 leds figure (3) the following table describes the meaning of the leds. Table(1) meaning of the leds label status color meaning on green power on power off na power off on green the mt880 is activated. On orange the built-in ppp dial-up software succeeds in dialing. Green the mt880 is being activat...

  • Page 3

    5 4. Click properties . Figure (7) 5. Click internet protocol (tcp/ip),then click properties. Figure (8) 6 6. At general tab, click obtain an ip address automatically and obtain dns server address automatically then click ok. Figure (9) 7. Verify the network settings of your pc as follows: on the wi...

  • Page 4

    7 8. Choose the support tab to view the ip address of the pc. The correct ip address should be in the range of 192.168.1.2 – 192.168.1.254. If the network settings are correct, you can start the installation. Figure (11) 8 b.2 for windows vista user 1. Click > settings > control panel. Figure (12) 2...

  • Page 5

    9 4. Double-click local area connection. Figure (15) 5. Click properties. Figure (16) 10 6. Choose internet protocol version 4 (tcp/ipv4) and click properties. Figure (17) 7. At general tab, click obtain an ip address automatically and obtain dns server address automatically then click ok. Figure (1...

  • Page 6

    11 8. Verify the network settings of your pc as follows: on the windows desktop,click > settings > network connections. Figure (19) 9. Double-click local area connection. Figure (20) 12 10. Click properties. Figure (21) 11. Click details to view the ip address of the pc. The correct ip address shoul...

  • Page 7

    13 c how to use 3bb cd-rom and username/password setting c.1 setting by using cd-rom 1. Insert the 3bb cd-rom into the cd-rom drive of your pc, if display shows as figure (30) please process as step 4, if display can’t show as figure (30) please process as step 2. Remark: if you can’t use 3bb cd-rom...

  • Page 8

    15 - double-click at user cd-rom drive. Figure (26) - open the cd-rom drive and right-click on the icon of the mt880r-t file. Figure (27) - choose run as administrator from shortcut menu as shown in figure (28). Figure (28) 16 - click allow in the displayed user account control as shown in figure (2...

  • Page 9

    17 4. Choose english language from the language list-down box in the lower left corner of the dialog box. See figure (30) 5. Click next>> in each of the following pages until you are asked to enter your username and password. See figure (31). 6. Enter your username and password provided by 3bb, and ...

  • Page 10

    19 web set up method 1. After connecting the cables as figure (1) page 1, run the adsl2+ router for 1–2 minutes. 2. Launch the internet explorer and access the address 192.168.1.1. Figure (35) 3. In the logon page, enter your username and password. The default values are admin (username) and 3bb (pa...

  • Page 11

    21 verifying network settings verify the network settings by selecting the status tab of the web setup page. See figure (40). If the ip address is 0.0.0.0, it indicates that the connection is incorrect. The correct value should be something like 202.Xxx.Xxx.Xxx. Figure (40) troubleshooting if there ...