3Com 3106c - NBX Wireless VoIP Phone Quick Reference Manual

NBX

®

 Cordless Telephone

Quick Reference Guide

Access the Automated Attendant

From any telephone on the system, dial 500.

Put a Call on Hold

While you are on a call, press Hold. The Access button for 

a line on hold blinks slowly. To return to the call, press the 

line button where the call is being held. 

Transfer a Call

1.

While on a call, press the Xfer (Transfer) button. The 

system places the caller on hold and selects a new line.

2.

Dial the extension number to which you want to 

transfer the call.

3.

For an announced transfer, when the recipient 

answers, announce the call, press the Xfer button 

again to complete the transfer, and then hang up. If 

the recipient does not want to take the call, retrieve it 

by pressing the Access button on which the call 

originated.

• For a blind transfer, as soon as you hear a full ring, 

press the Xfer button and hang up. (If you press the 

Xfer button too soon after you dial the number, the 

transfer may not occur. 

Make a Conference Call

1.

Dial a call, or receive a call from someone else. Two 

parties are now on the call.

2.

While on the call, press Feature + 430. The system 

selects a new line and places the first party on hold.

3.

Dial a call to an internal or external third party.

4.

For an announced conference, wait for the third party 

to answer the call, and then press Feature + 430 

again. For a blind conference, press Feature + 430 

immediately after you dial the number. 

5.

Repeat steps 2 through 4 to conference in a fourth 

party. 

• At least one party must be internal. The conference 

ends when the last internal party hangs up.

• To place your part of a conference call on hold, 

press Hold. The other parties can talk to each other, 

but they cannot hear you. (Music on Hold is not 

played.)

• To transfer a conference call, see Transfer a Call.

• To drop the last person whom you added to the 

conference (for instance, if the called party’s 

telephone is answered by someone else), press 

Feature + 431.

Mute a Call 

While you are on a call, press the MUTE button on the side 

of the phone to turn off the telephone’s microphone. Press 

the button a second time to turn off the Mute feature. The 

Talk icon on the telephone’s display panel blinks when the 

Mute feature is enabled.

Create Customized Labels for Your Telephone 

Log in to NBX NetSet > Speed Dials > Telephone 

Labels.

Set or Change Your Speed Dials, Call Coverage Point,  

Call Pickup, and Phone Lock

See the NBX Cordless Telephone Guide or NBX NetSet

™

User Help.

Forward Incoming Calls to Your Voice Mailbox (calls 

ring once and go to your call coverage point)

1.

Remove the handset from the charging unit and press 

Talk.

2.

Press Feature + 440.

3.

Listen for the confirmation beep and then hang up. 

You now hear the feature active tone.

To stop forwarding calls to your voice mailbox, repeat 

steps 1 through 3. Dial tone returns to normal. 

Switch Your Telephone to Do Not Disturb

1.

Remove the handset from the charging unit and press 

Talk. 

2.

Press Feature + 446 and hang up. All calls go directly 

to your call coverage point without ringing on your 

telephone. The display indicates that the feature is 

active. 

3.

To turn the feature off, repeat steps 1 and 2.

Park a Call

1.

While you are on a call, press Feature + 444.

2.

Dial one of the extensions reserved for Call Park:

3-digit dial plan — 601–609

4-digit dial plan — 6000–6099

3.

Notify another user about the call by dialing their 

extension or paging them. For information about 

paging, see the NBX Cordless Telephone Guide or NBX 

NetSet User Help.

• Ask your administrator if your system has a different 

range of Call Park extensions. 

• The call is parked until someone retrieves it, the 

caller hangs up, or the Call Park timer expires.

• If the extension you chose is busy or the Call Park 

timer expires, the call returns to your telephone. 

Press Feature + 444 again and try another 

extension.

Retrieve a Parked Call

Dial the Call Park extension where the call was parked.

Redial a Call 

1.

Press Talk.

2.

Press Feature + 401 to dial the most recent number 

you dialed.

qkref067-EN 1-2006