3Com 3C17666 Quick Reference Manual - page 16
16
3Com Switch 4200G Family
Command Reference
display snmp-agent community
Use the
display snmp-agent community
command to view the information about the currently configured
community names for SNMPv1 or SNMPv2c.
Any view
display snmp-agent group
Use the
display snmp-agent group
command to view group name, security model, state of various views
and storage models.
Any view
display snmp-agent mib-view
The
display snmp-agent mib-view
command is used to view the MIB view configuration information of
the current Ethernet switch.
Any view
display snmp-agent statistics
Use the
display snmp-agent statistics
command to view the statistics information about SNMP
packets.
Any view
display snmp-agent sys-info
Use the
display snmp-agent sys-info
command to view the system information of SNMP configuration.
Any view
display snmp-agent trap-list
Use the
display snmp-agent trap-list
command to display trap list information.
Any view
display snmp-agent usm-user
Use the
display snmp-agent usm-user
command to view SNMP user information.
Any view
display ssh server
Use the
display ssh server
command to display the status or session information about the SSH server
Any view
display ssh server-info
Use the
display ssh server-info
command to display the association between the server public keys
configured on the client and the servers.
Any view
display ssh user-information
Use the
display ssh user-information
command to display information about the current SSH users,
including user name, authentication mode, key name and authorized service types. If the username is
specified, the command displays information about the specified user.
Any view
display startup
Use the
display startup
command to display the startup configuration of a switch, including the name of
the current startup configuration file, the names of the main startup configuration file, and backup startup
configuration file to be used when the switch starts the next time, and so on.
Any view
display stop-accounting-buffer
Use the
display stop-accounting-buffer
command to view the no-response stop-accounting request
packets buffered in the device.
Any views
display stp
Use the
display stp
command to display the state and statistical information about one or all spanning
trees.
Any view
display stp region-configuration
Use the
display stp region-configuration
command to display the MST region configuration.
Any view
display tcp statistics
Use the
display tcp statistics
command to view the statistics information about TCP packets.
Any view
display tcp status
Use the
display tcp status
command to view the TCP connection state.
Any view