3Com 3C892 - OfficeConnect ISDN Lan Modem Router Setting up

Other manuals for 3C892 - OfficeConnect ISDN Lan Modem Router: User Manual, Getting Started Manual, User Manual
Manual is about: ISDN LAN Modem

Summary of 3C892 - OfficeConnect ISDN Lan Modem Router

  • Page 1

    S etting u p the isdn lan m odem o n a s tatic n etwork this note describes how to configure the isdn lan modem on a static network. If you have not determined whether your network is static, refer to the getting started guide. Installing the isdn lan modem if you have not already installed the isdn...

  • Page 2

    2 s etting u p the isdn lan m odem o n a s tatic n etwork labeled phone and then connect the other end of the rj-11 connector into the appropriate rj-11 port on the analog device. 4 connect the power cable from the wall power module into the back panel of the isdn lan modem and then plug the other e...

  • Page 3

    Setting up tcp/ip for windows and macintosh 3 3 select protocol and then click add . The select network protocol dialog box appears. Figure 2 select network protocol dialog box 4 from the manufacturers list box, select microsoft , and then from the network protocols list box, select tcp/ip . 5 click...

  • Page 4

    4 s etting u p the isdn lan m odem o n a s tatic n etwork 10 click ok to close the tcp/ip properties dialog box. 11 click ok to close the network dialog box. Figure 4 advanced parameters of tcp/ip properties 12 restart windows 95 to let these changes take effect. Tcp/ip setup using windows nt 4.0 wi...

  • Page 5

    Setting up tcp/ip for windows and macintosh 5 figure 5 windows nt protocols configuration window 3 click add . The select network protocol window appears as shown in figure 6. Figure 6 select network protocol window 4 select tcp/ip protocol and then click ok . The following message appears. Figure 7...

  • Page 6

    6 s etting u p the isdn lan m odem o n a s tatic n etwork 6 you are then prompted to insert your installation cd-rom. Insert the windows nt 4.0 cd rom and then click continue. If you have remote access service (ras) installed on your pc after the appropriate files are copied to your pc, a message bo...

  • Page 7

    Setting up tcp/ip for windows and macintosh 7 2 from the program manager, click network. 3 from the network group box, click network setup. Figure 9 network group box 4 from the network setup dialog box, click the drivers button. 5 from the network drivers dialog box, click add protocol. 6 select un...

  • Page 8

    8 s etting u p the isdn lan m odem o n a s tatic n etwork configuring the isdn lan modem this section describes how to configure the isdn lan modem for the typical configuration. The typical configuration provides the basic set up and it includes what most users need to get up and running. It provid...

  • Page 9

    Configuring the isdn lan modem 9 for windows nt 4.0 users 1 from the start menu, select settings and then control panel. 2 double-click network and then select the protocols tab. 3 highlight tcp/ip and then click properties, 4 click the ip address tab and then select the ethernet card associated wit...

  • Page 10

    10 s etting u p the isdn lan m odem o n a s tatic n etwork 9 click ok to close the microsoft tcp/ip configuration screen. 10 close the network drivers window. 11 click ok to close the network setup window. You will be asked to restart your computer. 12 click ok to do so. You are now ready to configu...

  • Page 11

    Configuring the isdn lan modem 11 the set passwordwindow appears. This password is used to guard access to the isdn lan modem’s configuration program. If you would like to restrict access to the configuration program, select a password and record it in a safe place. 3 enter a password in the passwor...

  • Page 12

    12 s etting u p the isdn lan m odem o n a s tatic n etwork figure 12 isp wizard window if you do not want to use the isp wizard, click abort. The isdn lan modem configuration main page appears. Refer to the officeconnect isdn lan modem user guide for instructions on configuring your isp connection m...

  • Page 13

    Configuring the isdn lan modem 13 14 click continue. A call is launched to your isp. A congratulations message appears when you successfully connect to your isp. This verifies the correct configuration of your isdn line and isp connection. If you cannot access a web site and your computer has a stat...

  • Page 14

    14 s etting u p the isdn lan m odem o n a s tatic n etwork a call is launched to your isp. A congratulations message appears when you successfully connect to your isp. This verifies the correct configuration of your isdn line and isp connection. This configuration covers the typical parameters neede...