3Com 3CRWE50194 - Home Wireless Gateway User Manual - Home Wireless Gateway
39
Troubleshooting
Home Wireless Gateway
■
Check power connection.
■
Verify Power LED status.
■
Check connections for modem and networking interface(s).
■
If you are unable to access the gateway's user interface, please check the
network settings of the computer you are using to access the gateway.
Verify that your TCP/IP settings are correct (refer to “Setting Up
Computers for Wireless Networking” on page 15). Verify that the correct
web address (192.168.2.1) is entered in the location field of the web
browser screen.
■
Ensure that the latest firmware is installed in the gateway.
Cable or DSL Modem
■
Check your Cable/DSL link light to verify a good connection.
■
Verify that the power cable is connected.
■
Verify that the cable or DSL line is connected.
■
Reboot your modem.
■
If your ISP does not support automatically assigned networking settings,
then enter your setting information into the setup program (Refer to
“Setting Up Your Gateway for an Internet Connection”on page 23).
Wireless Network
■
Ensure that the TCP/IP and wireless settings for all devices are correct (see
“Setting Up Computers for Wireless Networking”on page 15).
■
Ensure that you have a wireless adapter for each wireless client, and that
it is correctly installed and configured.
■
Verify that each wireless client has either Microsoft Windows 95 (or
higher) or Mac OS 8.5 (or higher).
Ethernet Networks
■
Check all connections to the gateway
■
Check all connections to each attached device on the network
■
Ensure that the TCP/IP settings for all devices are correct (see “Setting Up
Computers for Ethernet Networking”on page 16).
6