Http://www.3com.Com/ fast etherlink ® xl pci 10/100base-tx network interface card quick guide member of the 3com fast etherlink xl family of network interface cards part no. 09-1364-001 published october 1998 contains windows 98 installation instructions book page i thursday, september 24, 1998 3:42...
Ii 3com corporation ■ 5400 bayfront plaza ■ santa clara, california ■ 95052-8145 copyright © 1998, 3com corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptatio...
About this guide 1 about this guide this quick guide describes how to install the 3c905b-tx nic in your pc, connect it to the network, and install the network driver for windows 95, windows 98, and windows nt 4.0. This guide contains important information regarding the windows 98 installation. If yo...
2 f ast e ther l ink xl pci 10/100base-tx nic q uick g uide the 3com remote wake-up nic (3c905b-tx), shown in figure 1, operates as a wake-up nic only in pcs with a remote wake-up connector attached to the pc motherboard. This nic provides a network connection with or without the remote wake-up conn...
Installing the 3c905b-tx nic 3 in most pcs, slot 1 and 2 are bus mastering slots. Use slot 1 if possible with the 3c905b-tx nic. If you have a video pci card, install it in the last slot (the one farthest from slot 1). 6 unscrew the screw holding the pci slot’s backplate and remove it. 7 insert the ...
4 f ast e ther l ink xl pci 10/100base-tx nic q uick g uide connecting to the network you must connect the nic to the network before installing the network driver. To connect the 3c905b-tx nic to the network cable, follow these steps: 1 connect the network cable to the rj-45 port on the 3c905b-tx ni...
Windows 95 5 windows 95 this section describes how to install the network driver when your pc is running windows 95. You need the windows 95 system installation files to complete the installation. If windows 95 is not installed, or if you are replacing an installed nic, see the user guide for more i...
6 f ast e ther l ink xl pci 10/100base-tx nic q uick g uide 4 click the device manager tab. A list of devices appears, arranged by type. 5 double-click network adapters . The name of the installed 3c905b-tx nic appears: 3com fast etherlink xl adapter (3c905b) if this name does not appear or if a yel...
Windows nt 4.0 7 if the nic is not disabled and a red x still appears next to the name of the nic, update the driver by following these steps: a double-click the name of the nic. B select the driver tab, and then click the update driver button. C insert etherdisk diskette 2 when prompted for a disk....
8 f ast e ther l ink xl pci 10/100base-tx nic q uick g uide 5 click add adapter . 6 in the select network adapter window, select have disk . 7 insert etherdisk diskette 2 in drive a, and in the insert disk window, click ok . 8 in the select oem option box, select 3com fast etherlink adapter (3c905b)...
Book page 9 thursday, september 24, 1998 3:42 pm.
Book page 10 thursday, september 24, 1998 3:42 pm.
