3Com MSH 1005 User Manual - page 64
DUA1840-0AAA01
Choosing a Switch Management Level
3-3
Port ID
1 ... 28
When managing a Switch 1005
port
, type the port
number into this field before selecting the next screen:
■
Ports 1 to 4 represent ports on any Transceiver Module you may
have installed
■
Ports 5 to 12 are the eight fixed 10BASE-T port
■
Ports 12 to 24 are additional ports you may have if you have
installed an Expansion Module
■
Ports 25 to 27 are internal Ethernet backplane ports (10Mbps)
■
Port 28 is the internal Fast Ethernet backplane (100Mbps)
STATISTICS
Use this button to display statistics screens for the level of
management you have chosen (module, port or VLAN). See
.
SDB
Use this button to display the Switch Database Configuration
screen. See
“Configuring the Switch Database”
on page 3-14.
RESILIENCE
Use this button to display the resilience screen for the
module or specified port. See
on page 3-17.
SETUP
Use this button to display configuration screens for the level of
management you have chosen (module, port or VLAN). For information
about the Switch Module Setup and Port Setup screens, see
later in this chapter. Setting up VLANs is
described in
.