3Com NJ240FX - IntelliJack Switch User Manual - page 53
Manual is about: 3Com IntelliJack NJ240FX: User Guide
of
76
Changing Device Configuration
49
The values that remain unchanged when you click Restore Base Configuration are:
• Group Name
• Location Name
• Password
• IP Address
• DHCP Settings
• SNMP Get, Set, and Trap Community Strings
• SNMP Trap Destination IP Address
• Subnet Mask
• Gateway
• Device Log (stored in EEPROM)
• Management Port VID
ATU Table
Blank
VTU Table
Blank
All RADIUS settings
Blank
802.1X Supplicant Status
Disabled
802.1X Supplicant User Name and
Password
Blank
Port Setting
Default Value
State
Forwarding
Link
Auto negotiation
Flow Control
Off
MDI[X]
Force MDI
Multicast Limit
3%
Priority Lookup
Tag & IPV4
Port Priority
0 or 1
VLAN ID
1
802.1Q VLAN Mode
Disable VLANs
Data Rate Limit
All frames
Maximum Data Rate
No limit
Global Setting
Default Value