3Com PathBuilder S200 Series Feature Manual

Other manuals for PathBuilder S200 Series: User Manual, Owner's Manual, Manual
Manual is about: 3Com Switch Owner Manual

Summary of PathBuilder S200 Series

  • Page 1

    3com ® corporation pathbuilder ™ s200 series switch ip and lan features manual.

  • Page 2: Notice

    Notice © 1998 3com corporation 5400 bayfront plaza santa clara, ca 95052-8145 (408) 326-5000 all rights reserved. Printed in u.S.A. Portions reprinted with the permission of motorola, inc. Restricted rights notification for u.S. Government users the software (including firmware) addressed in this ma...

  • Page 3: Notice (Continued)

    Notice (continued) proprietary material information and software in this document are proprietary to 3com (or its suppliers) and without the express prior permission of an officer of 3com, may not be copied, reproduced, disclosed to others, published, or used, in whole or in part, for any purpose ot...

  • Page 5: Overview

    V about the ip and lan feature protocols manual overview introduction the ip and lan feature protocols manual contains user manuals that describe the options and protocols found in 3com’s operating network software (ons) license for ip and lan. Audience this binder is intended for users of pathbuild...

  • Page 6

    Vi trademark these are trademarks or registered trademarks of their respective companies or organizations: crosstalk / digital communications associates, inc. Hewlett-packard and hp / hewlett-packard company modulus 8/18 and modulus 9/21 / motorola, inc. Ms-dos / microsoft corporation multimedia per...

  • Page 7: What’S In This Manual

    Vii what’s in this manual introduction this manual contains detailed documentation covering all software features, options, and protocols that are supported in the ip and lan ons software license package. Bridging this manual describes features and capabilities of the bridging option. Routing this m...

  • Page 8: Related Documentation

    Viii about this manual (continued) related documentation introduction it may become necessary to refer to other documents in order to obtain all of the technical information that you may require. This section identifies all of the related 3com pathbuilder s200 series switch documentation including: ...

  • Page 9

    Ix about this manual (continued) pathbuilder s200 series switch installation manuals introduction installation manuals describe the installation and set up of specific pathbuilder s200 series switch equipment. Installation manuals provide information that may assist you in locating ports and modifyi...

  • Page 10

    X about this manual (continued) software license feature documentation introduction the pathbuilder s200 series switch ons software is supported by a suite of protocol documentation to provide you with the information required to fully understand the ways in which you can use your ons license. In ad...

  • Page 11

    Xi about this manual (continued) software coldloading/installation and alarms and reports manuals introduction these manuals offer direction on installing and coldloading software into pathbuilder s200 series switches, and explanations of the alarms and report messages that may be displayed on your ...