3Com SS3 BASELINE 100/1000 SW 6-PORT User Manual

Page of 8

Download

Print this page

Bookmark us

The SuperStack

3 Baseline 10/100/1000 Switch 6-Port

10BASE-T/100BASE-TX/1000BASE-T is a versatile,

easy-to-use switch. It is ideal for users who want the

high-speed performance of 10/100/1000 switching but

do not need sophisticated management capabilities. The

Baseline 10/100/1000 Switch 6-Port is shipped ready for

use. No configuration is necessary.

The Baseline 10/100/1000 Switch 6-Port can be rack-

mounted or free standing.

The Baseline 10/100/1000 Switch 6-Port includes:

One power cord

One mounting kit

Four standard height self-adhesive feet

A card with details of online registration

The Switch can be powered either from the AC mains

supply, or through an optional 3Com

SuperStack 3

Advanced Redundant Power System (3C16071A).

Contact your supplier for details.

The Baseline 10/100/1000 Switch 6-Port provides high

performance switched connections to 10 Mbps, 100

Mbps, and 1000 Mbps hubs, switches, servers and

workstations that need a dedicated switched link. The

following figure illustrates one possible configuration.

The Baseline 10/100/1000 Switch 6-Port has 6 shielded

RJ-45, 10/100/1000 Mbps auto-negotiating ports on the

front panel. Each 10/100/1000 Mbps port automatically

determines the speed, duplex mode, and MDIX mode of

the connected equipment and provides a suitable

switched connection. Note that 1000BASE-T connections

operate in full duplex mode only.

All Switch ports support flow control, which is a

mechanism that prevents packet loss during periods of

congestion on the network. Packet loss is caused by one

or more devices sending traffic to an already overloaded

port on the Switch. Flow control prevents packet loss by

NTRODUCTION

Baseline 10/100/1000 Switch

Baseline 10/100 Switches

1000Mbps

connections

Servers with

1000Mbps

connections

Baseline Hub

with 10Mbps connection

SuperStack

3 Baseline 10/100/1000 Switch 6-Port

10BASE-T/100BASE-TX/1000BASE-T (3C16468) User Guide

DUA1646-8AAA02

1 2 3 4 5 6 7 Next › »

Summary of SS3 BASELINE 100/1000 SW 6-PORT

Page 1
The superstack ® 3 baseline 10/100/1000 switch 6-port 10base-t/100base-tx/1000base-t is a versatile, easy-to-use switch. It is ideal for users who want the high-speed performance of 10/100/1000 switching but do not need sophisticated management capabilities. The baseline 10/100/1000 switch 6-port is...
Page 2: Eatures
Inhibiting the devices from generating more packets until the period of congestion ends. Flow control is implemented using the ieee 802.3x standard for ports operating in full duplex mode. The baseline 10/100/1000 switch 6-port supports a maximum of 8,192 mac addresses. The numbers in this diagram r...
Page 3: Nstalling
4 power led the power led indicate the status of the unit's internal power as follows: rear panel connections 5 power supply the baseline 10/100/1000 switch 6-port automatically adjusts to the supply voltage. Only use the power cord that is supplied with the unit. 6 socket for redundant power system...
Page 4: Ounting
Introduction the baseline 10/100/1000 switch 6-port is supplied with two mounting brackets and four screws. These are used for rack mounting the unit. When mounting the unit, you should take note of the guidelines given in “positioning the switch” on page 3 . Rack mounting the units the baseline 10/...
Page 5: L’
■ the appliance coupler (the connector to the unit and not the wall plug) must have a configuration for mating with an en60320/iec320 appliance inlet. ■ the socket outlet must be near to the unit and easily accessible. You can only remove power from the unit by disconnecting the power cord from the ...
Page 6: Echnical
Related standards the superstack 3 baseline 10/100/1000 switch 6-port 10base-t/100base-tx/1000base-t has been designed to the following standards: environmental physical electrical this warranty applies to customers located in the united states, australia, canada (except quebec), ireland, new zealan...
Page 7: Egulatory
If customer purchased this product directly from 3com, or if customer's reseller is unable to provide telephone support. To qualify for this telephone technical support, customer must register on the 3com web site at http://support.3com.Com/index.Htm, and state the date of purchase, product number, ...
Page 8: Egal
© 3com technologies, 2000. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without permission from 3com technologies. 3com technologies reserves the right to revi...