3D Robotics RTF-Y6 Manual - –

SF

SFP

+

–

Attach propellers

2

Remove the rings from the propeller 

packages. Select the ring with the 

smaller internal diameter, and insert 

it into the back of the propeller hub.

Remove the nuts and washers from the 

motors. Add SFP propellers to top 

motors and SF propellers to bottom 

motors with the writing on the 

propellers facing towards the sky.

Charge battery

3

Place the washer over the propeller, and 

secure the nut tightly on top. Always 

ensure that the propellers are fastened 

tightly to the motors before flying.

LiPo

3A

Connect the charger to the power 

adapter cable and a wall outlet. 

Connect the red cable to the + port 

and the black cable to the - port.

Set the charger to LiPo and 3A.

red

black

SF

SFP

SF

SFP