3G Audio KMIX Series User Manual - page 12
Music TO L
Music TO R
Music TO C
Music TO SUB
Music TO AUX1_L
Music TO AUX1_R
Music TO AUX2_L
Music TO AUX2_R
L OUT VOL
R OUT VOL
C OUT VOL
SUB OUT VOL
AUX1L OUT VOL
AUX1R OUT VOL
AUX2L OUT VOL
AUX2R OUT VOL
<10>
EFFECT_A M_VOD
Save all? N/Y
User Manual
Parameters can be adjusted with all the channel keys
Volume of Music output to left main channel: the range is (0%-99%);
Volume of Music output to right main channel: the range is (0%-99%);
Volume of Music output to middle channel: the range is (0%-99%);
Volume of Music output to bass channel: the range is (0%-99%);
Volume of Music output to assistant 1 left channel, the range is (0%-99%);
Volume of Music output to assistant 1 right channel, the range is (0%-99%);
Volume of Music output to assistant 2 left channel, the range is (0%-99%);
Volume of Music output to assistant 2 right channel, the range is (0%-99%);
Volume of left channel, the range is -80db-0db, 1db/class, absent: 0db;
Volume of right channel, the range is -80db-0db, 1db/class, absent: 0db;
Volume of mid channel, the range is -80db-0db, 1db/class, absent: 0db;
Volume of bass, the range is -80db-0db, 1db/class, absent: 0db;
Volume of assistant 1 left channel: the range is -80db-0db, 1db/class,
absent: 0db;
Volume of assistant 1 right channel: the range is -80db-0db, 1db/class,
absent: 0db;
Volume of assistant 2 left channel: the range is -80db-0db, 1db/class,
absent: 0db;
Volume Of assistant 2 right channels: the range is -80db-0db, 1db/class,
absent: 0db;
The parameter of equipment will preserve automatically,
however, the users can still preserve it by hand through the
following method:
Under any interface, just press any main volume button for 2 seconds, when the
screen reminds whether to preserve all the parameters, just release the button.
Turn corresponding button to choose "Y" or "N" to decide whether to preserve or not.
Using the remote control accessories of these products can operate partial function
(such as main volume, effect transfer or modified tone), at this time, if the user has
video frequency, it will display the user's adjustable parameter on the top right corner
of the monitor; it will automatically cancel the display of video frequency if there is no
any remote control within 5 seconds.
Image 14
EFFECT_A M_VOD
System Lock? N/Y
In order to avoid changing optionally present system parameter,
the users can lock system through this function. Under the
condition of system locking, we can only adjust three main
volumes (effect, mike, music), effect transfer, modified tone
and the selection of source of music, but it can not enter the
adjustment of submit menu; but we can set it up trough PC
soft wear!
U n d e r a n y i n t e r f a c e , j u s t p r e s s a n y m a i n v o l u m e b u t t o n f o r 4 s e c o n d s , w h e n t h e
screen reminds whether to lock the system (as Image 15) just open the lock. Turn
corresponding button to choose "Y" or "N" to decide whether to lock or not, and sign
t h e s y s t e m i n l o c k e d c o n d i t i o n u s i n g " c " o n t h e t o p r i g h t c o r n e r o f t h e f i r s t l i n e o f
screen. After locking, the display as the Image 16;
Image 15
7. DISPLAY AND OPERATION
7.3 System Parameter saving
7.4 Remote Control
7.5 System Function Lock