1. DL manuals
  2. 3G
  3. Security System
  4. TX-3G01
  5. User Manual

3G TX-3G01 User Manual

Manual is about: Video Alarm System

Summary of TX-3G01

  • Page 1

    3g video alarm system user manual for your fully understanding, please read the details of this user manual before using. If any difference on appearance, please make the object as the standard.If any function with improvement, maybe without prior informed..

  • Page 2

    Chapter one: brief instruction thank you for choosing our high-tech 3g video alarm system to secure your family and property. Please read this manual carefully before you set up this system. This system integrate advanced microcomputer technology and ic design. Lovely and luxury appearance, latest t...

  • Page 3

    Central panel, which can receive signal, recognize, and record and output alarm functions etc. Siren: it has 120db output when the system is triggered. Intelligent curtain pir motion sensor detects the movement from human beings usb data cable: function setting door sensor: one transmitter and one m...

  • Page 4

    (figure 1: back side connection) (figure 2: 3g main host structure) 1:power slot 2:gsm/3g network indication led 3: system state indication led 4: usb pc setup connector 5: rf antenna connector 6:external speaker 7: external siren 8:t-flash card slot 9: usim card slot 10:power adapter 11:connector o...

  • Page 5

    3 rd step: prepare 1pcs w-cdma sim card which can be dialed out(pre-charge), insert it into "sim card" slot parallelly. If it needs to connect siren, please plug it into "siren" slot, if it need recording, please insert tf flash card into "tf-flash" slot, then plug the adapter into "power" slot, the...

  • Page 6

    Most inside, then release is ok. Pop up: use finger to press sim card or t-flash card, then release, to get the card out of the system. 2. How to install door/window sensor (fig 3) a. Door sensor is consisted of two parts: transmitter part and magnetic part .You can fix them with screws or adhesive....

  • Page 7

    Chapter four: function setting and program via usb note: the pc setting software cd is included in the 3g standard package, you can copy all the files into your pc and then set up this software and set all the 3g system functions on pc easily! 4.1 power on the 3g camera with power adapter, connect t...

  • Page 8

    Here, you can set the following functions: 1) siren’s hooting time : siren’s hooting time is programmable when 3g system alarming(00-30 minutes) if you set 00, it will be mute alarm; if you set over 30 minutes, the alarm system won’t stop hooting until you disarm the system. E.G. By default setting ...

  • Page 9

    Control, the wired mini siren will make sound "du...". E.G by default setting ( it means siren accompany sound with on.) 9) arm/disarm sms report function on/off : if it’s on, whether you arm or disarm the host with remote control, the host will send you sms notification. E.G by default setting 10) ...

  • Page 10

    4.5 click to set the following alarm phone numbers: here, you can set the following alarm phone numbers: this 3g system support 6 groups of alarm phone numbers including audio phone number or audio & video phone number, 3 groups sms notification numbers and 3 groups mms phone numbers. Before setting...

  • Page 11

    4) set mms phone numbers: the 3g system will send mms with pictures to the pre-setting mms phone number when alarm happen. You can input the mms phone number as above interface show you. After setting, please click to save all the settings. 4.6 click to program wireless sensors: this 3g alarm system...

  • Page 12

    3) you can delete single remote controls or wireless sensors you have programmed showing as below: 4) you can delete all remotes you have programmed showing as below: 5) you can delete all sensors you have programmed showing as below: 6) setting wireless siren's id: the main host can work with our c...

  • Page 13

    You can click button to download alarm history records, and you can click to delete all the alarm history records. 4.8 arm/disarm by computer operation: click this button 4.9 click to set arm/disarm time: 1)you can set 3 groups of arm time and 3 groups of disarm time, then the 3g system will arm/dis...

  • Page 14

    E.G setting 1 st group timing arm/disarm: every day to arm from 9:00 and disarm until 17:30. Showing as below: press to save setting. E.G setting 2 nd group timing arm/disarm: monday to arm from 9:00 and disarm until 18:00. Showing as below: press to save setting. 2)checking timed arm/disarm infomat...

  • Page 15

    4.10 click to c on trol home appliance control switch: (optional) this 3g alarm system can remotely control by phone for up to 9ch single trigger,9ch double trigger, totally 18ch wireless home appliance plug or switch,showing as below: 4.11 upgrade: when our company has new software/program,our dist...

  • Page 16

    C. Alarm sms number setting this system support 3 sms alarm phone numbers. When main panel is in standby status, input “#0*0(1 ～ 6 )*phone number# ” on the wireless keypad, main panel will beep when you press every key. Two beep indicate alarm sms number setting ok.(1 ～ 6 means no.1 to no.6 alarm sm...

  • Page 17

    1) zone number: can be set as 00~99 zone numbers 2) sensors’ name code: "1" - remote control, "2" - pir, "3"- door sensor, "4" - smoke detector, "5" - gas detector, "6" - ir beams, "7" - water sensor, "8" - heat detector. "9" -- glass breaking sensor, "0" -- other wireless sensors. 3) sensors’ alarm...

  • Page 18

    When main panel is in standby status, inp ut “#9* 2 (1/0) # ” on the wireless keypad, main panel will beep when you press every key. Two beep indicate this function setting ok. Note: 1) #9* 2 1 # turn on the remote control opration audio 2) #9* 2 0 # turn off the remote control opration audio 3) the...

  • Page 19

    If the device is lying installed and you want to get correct image and video, you should input “#9*60#” on the wireless keypad when main panel is in standby status. If the device is hung installed and you want to get correct image and video, you should input “#9*61#” on the wireless keypad when main...

  • Page 20

    16. Formatting tf card input " #9*67 + password+ #" on wireless keypad, main panel will beep when setting is over. Two beep indicate operation successful. After operating this command, the main panel will delete all the file in tf card. 17. How to set disarm indication tone of door sensor start disa...

  • Page 21

    3. How to control when you receive alarm calling 1) when alarm happens, the siren will hoot to warn neighbours, and the video alarm main panel will auto dial the preset 6 alarm phone numbers. If it is set visual phone call, when you answer the alarm calling, you can view the video around the video a...

  • Page 22

    Press "9" for reverse video/image. Press "7" for forward video/image. Press "0" for voice menu replay. The main host will replay ptz controlling voice menu again. Press "*" for back on main voice menu directory. Please don't forget to press "#" for exiting phone operation&confirm the alarm! If you h...

  • Page 23

    If user name and password are in blank, so it don't need to fill in. Only send: password+apn+"apn" e.G china mobile apn is cmwap, user name: in blank, password: in blank sending sms to 3g alarm main host: 1234 apn cmwap after setting successful, it will feedback sms: access point name setting succes...

  • Page 24

    5. Wireless keypad and remote control don’t work any more? A. Low voltage b. Battery shrapnel loosen or rust c. Not coding to the main panel solution: change battery, code to the main panel, contact your local distributor to purchase new ones 6. Siren not work? A. Siren pin and jack short circuit or...

  • Page 25

    2. Standard package: 3g video alarm 1pcs(including camera bracket 1set), remote controller 2pcs, door sensor 1pcs, pir motion sensor 1pcs, wireless keypad 1pcs, mini siren 1pcs, external speaker 1pcs, usb data cable 1pcs, power adapter 1pcs. Note: 1. This device should installed at a dry and ventila...