3Jtech FWT Wifi AP Quick Setup Manual

Page of 4

Download

Bookmark us

Ver 1.0.0.0

Since 1988

Quick Setup Guide for FWT Wifi AP_USB x 4

1. FWT Wifi AP_USB x 4 Packing List :

Before you start installing the FWT Wifi AP_USB x 4, please verify that the package contains

the following items:

One Set of FWT Wifi AP_USB x 4,

1x RJ-45 Network Cable, RJ-11 Phone Cable,

External 3G Antenna with 3M Antenna Cable,

3G USB Dongle (Optional),

1x Power Adapter,

CD with User’s Manual, and this Quick Setup Guide

NOTE: Please notify your sales representative immediately if any items listed above is missing or damaged.

2. Hardware Connection Settings

1) Connect PC to LAN port of your FWT Wifi AP_USB x 4 using a RJ-45 cable.

2) Make sure the SIM card has inserted to the modem, and the modem is ready as well.

3) Connect XDSL/Cable to the WAN port of your FWT Wifi AP_USB x 4 using a RJ-45 cable if

needed.

4) Sequentially plug the external 3G USB dongle(s) into the USB connector on your

FWT Wifi AP_USB x 4 for the load balance with multiple 3G. (For example, if you own single

USB dongle, it must be connected to USB 1 port first; if you own two USB dongles, they

must be connected to USB 1 and USB 2 ports.)

NOTE: The SIM card should be inserted when the device is powered off.

5) Connect the power cable to the power connector of your FWT Wifi AP_USB x 4.

6) For using the Fixed Wireless Terminal (FWT) function, connect an analog phone to the

PHONE port of your FWT Wifi AP_USB x 4 using a RJ-11 cable.

Fig.1 The Connection of FWT Wifi AP_USB x 4

Page 1
Ver 1.0.0.0 since 1988 1 quick setup guide for fwt wifi ap_usb x 4 1. Fwt wifi ap_usb x 4 packing list : before you start installing the fwt wifi ap_usb x 4, please verify that the package contains the following items: one set of fwt wifi ap_usb x 4, 1x rj-45 network cable, rj-11 phone cable, ...
Page 2
Ver 1.0.0.0 since 1988 2 3. Led description of the rear panel led color status power( ) yellow lit when +12v dc power is on and working. Sms( ) yellow lit when receiving any new sms(s). Off at any status except the incoming of new sms(s). Wlan(wireless lan ) yellow lit when the wifi function is enab...
Page 3
Ver 1.0.0.0 since 1988 3 4. Software connection settings refer to the following sections to set up the fwt wifi ap_usb x 4. Before the setup, please confirm that the lan port of the ap has been connected with the pc via rj-45: y set up 3g settings for the fwt wifi ap_usb x 4 1. Please connect your c...
Page 4
Ver 1.0.0.0 since 1988 4 7. Also accordingly fill in the necessary parameters, including access point name (apn), dial number, username and password for 3g mode: 1~ 3 once the step 4 in section 2 is configured. (note: make sure pin code for sim cards inserted into usb1/usb2/usb3 dongle has been disa...