3Jtech HSPA FWT WiFi AP Quick Setup Manual

Page of 4

Download

Bookmark us

Ver 1.0.0.3

Since 1988

Quick Setup Guide for HSPA FWT WiFi AP

1. HSPA FWT WiFi AP Packing List :

Before you start installing the HSPA FWT WiFi AP, please verify that the package contains the

following items:

One Set of HSPA FWT WiFi AP,

1x RJ45 Network Cable,

External 3G Antenna with 3M Antenna Cable,

RJ11 Phone Cable,

1x Power Adapter,

CD with User’s Manual,

This Quick Setup Guide

NOTE: Please notify your sales representative immediately if any items listed above is missing or damaged.

2. Hardware Connection Settings

1) Connect PC to LAN port of your HSPA FWT WiFi AP using a RJ-45 cable.

2) Make sure the SIM card has inserted to the modem, and the modem is ready as well.

3) Connect the power cable to the power connector of your HSPA FWT WiFi AP.

4) For using the Fixed Wireless Terminal (FWT) function, connect an analog phone to the

PHONE port of your HSPA FWT WiFi AP using a RJ-11 cable.

Fig.1 The Connection of HSPA FWT WiFi AP

Page 1
Ver 1.0.0.3 since 1988 1 quick setup guide for hspa fwt wifi ap 1. Hspa fwt wifi ap packing list : before you start installing the hspa fwt wifi ap, please verify that the package contains the following items: one set of hspa fwt wifi ap, 1x rj45 network cable, external 3g antenna with 3m ante...
Page 2
Ver 1.0.0.3 since 1988 2 3. Led description of the rear panel led color status power( ) yellow lit when +8v dc power is on and working. Lan link ( ) yellow lit when the cable connection with device exists. Flash when the data is transmitting. Off when no cable connection exists. Wlan(wireless lan ) ...
Page 3
Ver 1.0.0.3 since 1988 3 4. Software connection settings refer to the following sections to set up the hspa fwt wifi ap. Before the setup, please confirm that the lan port of the ap has been connected with the pc via rj-45: y set up 3g settings for the hspa fwt wifi ap 1. Please connect your compute...
Page 4
Ver 1.0.0.3 since 1988 4 6. Click on apply after completing the setup. Wait 30 seconds around to have the new settings taken effect. 7. You can check if the hspa fwt wifi ap is online by clicking on the management / status function. The information should be displayed under the internet configuratio...