1. DL manuals
  2. 3M
  3. Thermostat
  4. 3M-30
  5. Operation Manual

3M 3M-30 Operation Manual

Other manuals for 3M-30: Operation

Summary of 3M-30

  • Page 1

    Pg 1 operation guide 3m-30 the 3m-30 programmable communicating thermostat operates via a high-quality, easy- to-use touch screen. To program or adjust your 3m-30, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” the screen will respon...

  • Page 2: Home Screen

    Pg 2 pg 2 control screens before you operate the 3m-30 please get familiar with these basic control screens. All the 3m-30 functions are accessed through these screens. Home, menu, program and manual . The 3m-30 touch screen technology allows you to select (by touching) an item and change it using t...

  • Page 3: Menu Screen

    Pg 2 pg 2 pg 3 menu screen the menu screen is the gateway to many functions or settings of the 3m-30. It is displayed when you press the menu button. [see page 9 for details] diff swing filter pm f c hvac setup calibrate set day touch this area to set the day of the week set time touch this area to ...

  • Page 4: Program Screen

    Pg 4 pg 4 program screen the program screen sets the 3m-30 control for your home hvac system. It is displayed when you press the prog button. [see page 7 for details] program morn am f copy day heat set program day touch this area to set the day of the week you want to program targettemps for. Set t...

  • Page 5: Manual Screen

    Pg 4 pg 4 pg 5 manual screen the manual screen control screen is where you can make temporary changes to your 3m-30’s operation. Touch the main temperature display to use this screen. [see page 12 for details] hold temporary f temp holiday heat target temperature room temperature return home temp up...

  • Page 6

    Pg 6 pg 6 initial settings press menu to prepare the thermostat (from home screen). Set day of the week - touch the day of the week area to cycle through the days of the week to select the current day. Set time of day - touch the time of day arrows to move the time selection forward or backward unti...

  • Page 7

    Pg 6 pg 6 pg 7 auto-run program the 3m-30 comes pre-programmed with an epa approved program. This program is recommended by the epa for energy efficiency. We strongly recommend that you auto-run this program for one week, and see if it works for you. If it does not fit your needs you can always inpu...

  • Page 8

    Pg 8 pg 8 select the day you want to program. The day of the week starts at su - sunday and can be advanced to the day you want to program. Touch the day of the week area to cycle through the days of the week to the desired day. Select the time slot (period) you want to program (morn,day, even, nite...

  • Page 9

    Pg 8 pg 8 pg 9 menu screen functions press menu to bring up menu screen. Time of day touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps). Day of week touch day area to select pr...

  • Page 10

    Pg 10 pg 10 chirp set - touch this to turn the audible chirp sound on or off. F c set - touch this to switch the temperature display scale from of to oc . Filter - air filter alert - the 3m-30 can be programmed to remind you when the air filter needs changing. Touch filter. The display will show the...

  • Page 11: Calibrate

    Pg 10 pg 10 pg 11 to unlock , press menu. Touch and hold icon for 5 seconds for 2 bars (if not there already). Then touch and hold the icon for another 5 seconds. Each 5 second touch and hold must be separate. Return home by touching the icon. Calibrate your thermostat was accurately calibrated at t...

  • Page 12

    Pg 12 pg 12 manual screen functions the 3m-30 has 4 manual override commands. The manual screen is accessed by touching the large current temperature display on the middle of the home screen. Important: the mode must be in heat or cool to access the manual screen. Temporary override touch the + / - ...

  • Page 13

    Pg 12 pg 12 pg 13 holiday appears (after sat). The default holiday program is set as 2 time slots; all day (same target morn, day and even) and a different target for nite. [default program: heat 70 o f all day and 62 o f at night. Cool 78 o f all day and 82 o f at night.] emer (in heat pump type) i...

  • Page 14

    Pg 14 pg 14 fan switch auto: the fan control is normally in auto mode, meaning that the fan operates automatically with the hvac system and the thermostat. When the fan switch is in on, the fan will run continuously until switched back to auto. [note: fan on function is available in the off mode to ...

  • Page 15: Caution

    Pg 14 pg 14 pg 15 communicating thermostat the 3m-30 has 2 rtm-1 radio ports. These allow your thermostat to communicate with other systems. Depending on your area power company, programs may be available to connect your thermostat to power grid status information. This can make it easy for you to m...