3M 41-81368-505 - MicroTouch M150 - 15" LCD Monitor User Manual - page 16
16
3M™ MicroTouch™ Display M1500SS User Guide
3M Touch Systems, Inc. Proprietary Information
For example, you can use the Windows Display Properties control panel to adjust the
desktop area (resolution), color depth, and refresh rate. Whenever you change these
settings or calibrate the touch sensor, the image size, position, or shape may change. This
behavior is normal. You can readjust the image using the display controls described in
Chapter 3 of this guide.
For more information on adjusting the desktop area (resolution), color depth, or refresh
rate, refer to your video card documentation.
Multimedia Features
The M1500SS Display comes with multimedia features built-in. It has a microphone and
speakers built into the back of the display bezel and includes multimedia cables. These
cables can be connected from either the rear of the display or in front -- two separate sets
of jacks are included.
Figure 7 Multimedia Cables
Optional Card Reader Bracket
The M1500SS Display is available with an optional card reader bracket (and (2) M3
screws) that supports IDTech and MagTech brand electronic card readers. The black
version is part number 5013923 and the beige version is 5103924. The M1500SS has
been designed with slots on either side of the bezel to accommodate this card reader
bracket. Simply slide the bracket into the appropriate holes and pull down slightly to
lock in place. Refer to the illustration below for wiring suggestions. Note that 3M Touch
Systems does not supply these card readers.
Supported MagStripe Readers
At the time of publication, the following “mini” magnetic card readers have been tested
to fit the 3M Touch Systems optional card reader bracket. Consult your card reader sales
representative for model numbers not listed here.
Table 2. Supported MagStripe Readers
ID Tech
MagTek
all MiniMag™ readers
all "mini" sized readers
IDT 3331-02U
IDT 3321-33
2180201
IDT 3331-12U
IDT 3321-33PP
2180202