1. DL manuals
  2. 3M
  3. Respiratory Product
  4. 8515/07189
  5. User Instructions

3M 8515/07189 User Instructions

Summary of 8515/07189

  • Page 1

    1 8515/07189 respirator n95 particulate 3m recommended for welding, brazing, metal pouring and cutting user instructions (keep insert for reference) 07189 is a catalog number only. Niosh approved as 3mtm 8515 n95 particulate respirator. See insert for approval label. T m .Com distributed by: (888) 9...

  • Page 2

    2 this respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or instructions, or call 3m in u.S.A., 1-800-247-3941. In canada, call marketing at 1-800-265-1840, ext. 6137 or technical service at 1-800-267-4414. Important: before u...

  • Page 3

    3 time use limitation: if respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area and replace the respirator. Fitting instructions: to be followed each time respirator is worn. Fig. 1 fig. 2 fig. 3 fig. 4 1. Cup the respirator in your hand, with the nosepiece ...

  • Page 4

    4 sides of your head. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor . Removal instructions: see step 2 of fitting instructions and cup respirator in hand to maintain position on face. Pull bottom strap over head. Still holding respirator in position, pu...

  • Page 5

    5 for more information and assistance on 3m occupational health and environmental safety products, contact your local 3m representative or call 3m oh&esd technical service toll free in u.S.A., 1-800-243-4630. In canada, call marketing at 1-800-265-1840, ext. 6137 or technical service at 1-800- 267-4...