February 2005 78-6970-9381-9 rev. B copyright © 2005, 3m. All rights reserved. …interactive whiteboard 9200iw …deluxe interactive whiteboard 9200ic operator’s guide guide de l’operateur benutzerhandbuch guida dell’operatore guía del operador 3 digital wall display.
(this page intentionally left blank for printed version) e n g l is h.
3 3m™ digital walldisplay © 3m 2004. All rights reserved. Contents f r a n Ç a is d e u t s c h it a l ia n o e s p a Ñ o l e n g l is h contents english introduction ........................................................................................................................................
4 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h contents italiano introduzione ...............................................................................................................................................181 installazione e impostazione del sistema .............
5 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h contents contents introduction thank you for choosing 3m .........................................................................................................................7 safety information .................................
6 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h contents using the 3m walldisplay as a copyboard installing ebeam software on your computer ............................................................................................36 installing the software .....................
7 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h introduction thank you for choosing 3m thank you for choosing 3m equipment. This product has been produced in accordance with 3m’s highest quality and safety standards to ensure smooth and troublefree use in the year...
8 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h warning to reduce the risk associated with hazardous voltage: • do not attempt to service the wall display other than performing routine lamp replacement. Service should only be performed by a 3m authorized service...
9 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h warning to reduce the risk of environmental contamination due to lead based solder: • don’t throw circuit boards in the trash. Dispose of circuit boards in accordance with your respective governmental agencies for ...
10 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h important notes • in some countries, the voltage is not stable. This appliance is designed to operate within a range of 100~240 vac. In these countries, it is recommended to install a power stabilizer unit. • do not...
11 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h product safety label the following safety label is used on or within the 3m digital walldisplay to alert you to this area requiring your attention. Wall display fro m 3 m save these instructions the information cont...
12 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h netscape and the netscape n and ship’s wheel logos are registered trademarks of netscape communications corporation in the u.S. And other countries. Navigator and communicator are also trademarks of netscape communi...
13 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h model identification and differences identify model the nameplate, located behind the storage door, identifies the 3m digital walldisplay (dwd). Push the storage door to open it. The figure below shows the nameplate...
14 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h contents the 3m digital walldisplay (3m dwd) is shipped with the necessary cables required for standard vcr, pc, macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items s...
15 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h part identification wall display fro m 3 m 1 3 5 11 2 4 pc audio usb mouse serial mouse rs-232 audio video computer row 1 2 (this row for digital whiteboard option only) printer computer s-video rca vga dvi-d out in...
16 introduction 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h 3m digital wall display features the 3m digital walldisplay combines the following features into one sleek, sophisticated package. • full connectivity for computer or video presentations • large 60˝ diagonal screen ...
17 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h installation and system setup installation and system setup recommendation and things to consider before installing location of unit • place near ac outlet. The ac power connection is located on the lower-left corner of the 3m d...
18 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h installation and system setup installing the wall bracket unpacking wall bracket and hardware 1. Place the shipping container face up on the floor. 2. Open the end of the shipping container. 3. Slide the shipping tray partially ...
19 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h installation and system setup hanging the 3m digital walldisplay unpacking the 3m digital walldisplay 1. Place the shipping container face up on the floor and open the end previous opened. 2. Slide the shipping tray out of the s...
20 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h installation and system setup hanging on the wall 1. If possible, position the 3m digital walldisplay and shipping tray in front of the wall where the bracket is located. Position the unit so that the projection arm is closest t...
21 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h installation and system setup system setup it only takes a few minutes to connect the 3m digital walldisplay to your computer, vcr, dvd player, video conference unit, or other devices. The connection panel is located underneath ...
22 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h operation operation startup 1. Plug power cord into wall socket. 2. Flip on the master power switch beneath the lower left corner of the 3m digital walldisplay, near the 3m label. This should stay on at all times. Now the 3m dig...
23 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h operation shutdown 1. Press the on/off button on the bottom center panel of the 3m digital walldisplay unit. 2. The lamp will turn off and the projector arm will return to its housing. The on/off button will flash red as the arm...
24 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h remote control unit remote control unit features the remote control sensor is on the front lower panel of the 3m digital walldisplay unit. The distance between the sensor and remote control must be shorter than 4 meters (13 feet...
25 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h remote control unit forward keypad power press to turn the 3m digital walldisplay on/off. When power is turned on, the 3m digital walldisplay will automatically extend the projection arm and ignite the lamp. Mute press to tempor...
26 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h remote control unit rear keypad pointer press to turn the pointing function on/off. A green dot will appear on the screen. The dot can be controlled by pressing the arrows on the disk pad. Volume press the + button to increase o...
27 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h remote control unit installing or replacing batteries 1. Push and slide the battery compartment tab in the direction shown, then lift it off. 2. Install two aaa batteries as indicated by the diagram inside the compartment. 3. Sn...
28 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h digital markers and eraser digital markers and eraser assembling digital markers the 3m digital walldisplay recognizes dry-erase marker writing by signalling the marker’s exact location to the bezel. These signals are created an...
29 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h digital markers and eraser assembling digital eraser the digital eraser erases marker input by sending signals from the digital eraser in the same way as the digital markers. The eraser sends an “erase” signal when you press the...
30 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system menu system menu navigation most adjustments and settings are available in the main menu and sub-menus. To navigate and make adjustments, use the 3m digital walldisplay’s menu keypad button or the remote control’s me...
31 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system warm—cool slider the warm—cool slider adjusts the color temperature. Move the slider toward warm to achieve warmer, more reddish images. Move the slider toward cool to achieve cooler, more bluish images. To adjust th...
32 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system mute menu function the mute menu function turns the sound on and off. To turn the mute menu function on: 1. Open the menu system by pressing the remote control menu button or any arrow on the menu keypad. 2. Select t...
33 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system input select menu the input select menu defines the displayed video source. When input select menu is selected, the current video source is shown. The input options are: computer (vga input), dvi-d, s-video, comp. Vi...
34 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system image adj sub-menu the image adjustment sub-menu adjusts the projected image settings for the vga and dvi-d inputs. Use the vertical position and horizontal position sliders to reposition an image if portions are not...
35 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h menu system tools sub-menu the tools sub-menu provides access to the following settings and tools: onscreen timer allows you to set a timer and display it onscreen. Language selects which language to use for onscreen commands. (...
36 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h using the 3m digital walldisplay as a copyboard using the 3m walldisplay as a copyboard installing ebeam software on your computer minimum requirements the ebeam software will run on any computers that meet these minimum criteri...
37 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h using the 3m digital walldisplay as a copyboard copyboard mode (9200ic) this mode lets the 3m digital walldisplay unit capture all the data from the screen and print it to a printer connected directly to the 3m digital walldispl...
38 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h using the 3m digital walldisplay as a copyboard using projection mode top led light legend connection error (solid red) (solid amber) communicating with a pc printer computer vga 1. Turn on the 3m digital walldisplay unit and wa...
39 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h using the 3m digital walldisplay as a copyboard the interactive stylus the ebeam interactive stylus was created specifically for use with the 3m digital walldisplay. The interactive stylus behaves exactly like a mouse attached t...
40 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance maintenance general maintenance for general cleaning of the screen and exterior of the 3m digital walldisplay, use a damp cloth or dry cleaning cloth such as the 3m high performance cleaning cloth. Standard dry-erase...
41 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance lamp replacement 1. Turn the power off and disconnect the power cord from the outlet. 2. Allow approximately 45 minutes for the lamp to cool, if necessary. 3. There are two indentations behind the top of the facade, ...
42 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance 5a. Hold down this receptacle with your left thumb and (5b) pull connectors out of the receptacle with other hand. 5b 5a 6. Open the latch by moving the metal lever to the left. Lever 7. While holding the latch open,...
43 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance 11. Align the slots and tabs of the right side of the facade and projection arm as shown, then snap firmly into place. 12. Align the slots and tabs of the left side of the facade and projection head as shown, then sn...
44 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance resetting lamp hours please do the following within 10 minutes of turning power on after you replace the lamp. 1. Press the menu keypad or the menu button on the remote control and use the disk pad to scroll down to ...
45 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance replacing projectionscreen replacing the 3m digital walldisplay screen is very simple. 1. Turn off the 3m digital walldisplay and disconnect the power cord from the wall outlet. 2. Remove the right and left side beze...
46 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance optical engine adjustment the optical engine needs to be aligned when the vertical or horizontal images do not cover the screen or are tilted. Note: before continuing with this adjustment, move the arm assembly up an...
47 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance 4. Loosen locking screw. Then use blade screwdriver on adjustment screw to move screen image from side to side if required. Tighten locking screw. 5. Locate adjustment screw for right side screen adjustment. Locate l...
48 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h maintenance 7. Locate adjustment screw for left side screen adjustment. Locate locking screw for left side adjustment. 8. Loosen locking screw. Then use blade screwdriver o...
49 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting troubleshooting common problems and solutions symptom cause solution power cannot be turned on. The power cord is disconnected. Insert the power cord into an ac socket. The master power switch is not turned on. T...
50 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting common problems and solutions symptom cause solution desired input source cannot be detected. The input source is not active. A signal must be present for the input to be selected. Connect an active input source ...
51 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting ebeam software troubleshooting provides solutions for known issues with the ebeam system. This section covers the microsoft ® windows ® versions of ebeam software. Ebeam hardware detection/use message ebeam try t...
52 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting network connection/shared meetings problem ebeam try the following: to share a meeting, the ebeam hardware must be connected and detected.” (this message appears when you choose shared meeting.) software • to ser...
53 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting writing data/capture problem ebeam try the following: software states that the ebeam hardware is detected, but writing does not appear in ebeam software’s meeting application active page. Hardware • press the dig...
54 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting writing data/capture problem ebeam try the following: digital marker strokes made at the bottom of the whiteboard do not appear in ebeam software’s meeting application. Software • make sure you are writing within...
55 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting efi meeting applet problem ebeam try the following: applet does not load. Software microsoft ® internet explorer ® • in internet explorer, go to tools > internet options. Click the security tab, and then click re...
56 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h troubleshooting background images problem ebeam try the following: microsoft ® excel ® spreadsheet did not load properly. Software • is there a graph in the spreadsheet? Ebeam software’s meeting application cannot import a sprea...
57 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h service information service information replacement parts description part number power cord (eu) 78-8131-0004-3 power cord (us) 78-8131-0005-0 power cord (uk) 78-8131-0003-5 serial mouse cable 26-1015-0423-6 usb cable 26-1015-0...
58 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h appendix appendix 3m™ digital walldisplay specifications display size 60" diagonal viewing area display aspect ratio 4:3 display system single chip, dlp™ texas instruments technology dlp chip chip diagonal size 0.7 inch number o...
59 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h appendix input/output signal specifications computer video signal analog 0.7vp-p, 75 ohms termination (positive polarity) horizontal sync signal ttl level (positive/negative polarity) vertical sync signal ttl level (positive/neg...
60 3m™ digital walldisplay © 3m 2004. All rights reserved. E n g l is h appendix printer compatibility printer requirements printer control language: pcl 3, pcl 4, or pcl 5. Connectivity: parallel port compatible printers apollo p-2200 series brother hs-5000 brother hl1440 brother hl-2700cn gcc tech...
(this page intentionally left blank for printed version).
3m austin center building a145-5n-01 6801 river place blvd. Austin, tx 78726-9000 3m canada p.O. Box 5757 london, ontario n6a 4t1 3m mexico, s.A. De c.V. Apartado postal 14-139 mexico, d.F. 07000 mexico 3m europe boulevard de l’oise 95006 cerge pontoise cedex france litho in usa copyright © 2002 3m ...