3M 963 Instruction Manual

Manual is about: Benchtop Air Ionizer

Summary of 963

  • Page 1

    3 963/963e benchtop air ionizer instructions.

  • Page 2

    3 index section page safety information ..................................................................................................4 1. Description........................................................................................................5 2. Performance ............................

  • Page 3

    4 caution • the 963 is designed for use in those areas using ac 120v electrical service, while the 963e runs off of dc24v power, supplied by a universal power supply capable of converting ac 100-240v electrical service. Usage of either unit with the incorrect electrical voltage could result in incor...

  • Page 4

    5 section 1. Description the 3m 963/963e benchtop air ionizer is a self-contained ionizing air blower designed to remove static charges from non-conductive objects. The proprietary circuitry contained in the blower generates equal levels of positive and negative ions, and maintains correct balance d...

  • Page 5

    6 4.2 determine the location of an appropriate electrical outlet. For the 963, connect the power cord to the ionizer, and insert the other end of power cable into the appropriate electrical outlet. For the 963e, connect the universal power supply to the ionizer, using the mini din connector. Then, u...

  • Page 6

    7 section 7. Performance verification the 963/963e benchtop air ionizers are factory adjusted to provide optimum performance. Further adjustment in the field is not possible. However, the following instructions can be followed to determine whether the ionizer is performing to specification. The test...

  • Page 7

    Section 8. 963 benchtop air ionizer physical characteristics item typical properties 963 963e power ratings ac 120v 60 hz 0.20 a 20 w dc 24v 0.42 a 10 w through included universal power transformer power inlet iec 320 socket mini din socket power transformer - input: ac 100v-240v, 0.4a, 50/60 hz int...

  • Page 8

    9 customer and technical service within the u.S. : customer service and technical support can be obtained by calling the 3m electronic handling & protection division customer service: (800) 328-1368 technical support: (512) 984-3200 outside of the u.S. : for customer service and technical support, p...

  • Page 9

    10

  • Page 10

    11 warranty limited warranty - 3m expressly warrants that for a period of one year from the date of purchase, 3m static control products will be free of defects in materials (parts) and workmanship (labor). Defects occurring during the warranty period will be repaired or products will be replaced at...

  • Page 11

    Litho in the usa. © 3m 2000 34-7049-7753-6 recycled paper 40% pre-consumer 10% post-consumer 3 electronic handling & protection division 6801 river place blvd. Austin, tx 78726-9000 (800) 328-1368 www.3m.Com/ehpd.