1. DL manuals
  2. 3M
  3. Projector
  4. Digital Projector X64
  5. Operator's Manual

3M Digital Projector X64 Operator's Manual

Manual is about: Safety Guide

Summary of Digital Projector X64

  • Page 1

    1 x64 operator's guide technical resolution (h x v) h. Frequency (khz) v. Frequency (hz) rating signal mode 720 x 400 37.9 85.0 vesa text 640 x 480 31.5 59.9 vesa vga (60hz) 640 x 480 37.9 72.8 vesa vga (72hz) 640 x 480 37.5 75.0 vesa vga (75hz) 640 x 480 43.3 85.0 vesa vga (85hz) 800 x 600 35.2 56....

  • Page 2

    2 initial set signals initial set signals the following signals are used for the initial settings. The signal timing of some pc models may be different. In such case, adjust the items v position and h position in image menu. Computer signal +rul]rqwdovljqdowlplqjȝv computer signal vertical signal ti...

  • Page 3

    3 connection to the ports a computer in1, b computer in2, c monitor out d-sub 15pin mini shrink jack ‡9lghrvljqdo5*%vhsdudwh$qdorj9ssȍ terminated (positive) • h/v. Sync. Signal: ttl level (positive/negative) • composite sync. Signal: ttl level pin signal pin signal 1 video red 10 ground 2 video gree...

  • Page 4

    4 connection to the ports (continued) 4 3 2 1 h video rca jack • system: ntsc, pal, secam, pal-m, pal-n, ntsc4.43 ‡“9ssȍwhuplqdwru g s-video mini din 4pin jack pin signal 1 &roruvljqdo9ss176&exuvwȍwhuplqdwru &roruvljqdo9ss3$/6(&$0exuvwȍwhuplqdwru 2 %uljkwqhvvvljqdo9ssȍwhuplqdwru 3 ground 4 ground f ...

  • Page 5

    5 connection to the ports (continued) i audio in1, j audio in2 Ø3.5 stereo mini jack ‡p9upvnŸwhuplqdwru audio in3 k l, l r rca jack x2 ‡p9upvnŸwhuplqdwru m audio out Ø3.5 stereo mini jack ‡p9upvnŸrxwsxwlpshgdqfh to input scart rgb signal; ex.: i j m k l to input scart rgb signal to the projector, us...

  • Page 6

    6 connection to the ports (continued) n usb usb b type jack pin signal 1 +5v 2 - data 3 + data 4 ground 2 1 3 4 o n o control d-sub 9pin plug • about the details of rs-232c communication, please refer to the following page. Pin signal pin signal pin signal 1 (no connection) 4 (no connection) 7 rts 2...

  • Page 7

    7 command control via the network command control via the network connecting the cable 1. Turn off the projector and the computer. 2. Connect the control port of the projector with a rs-232c port of the frpsxwhue\d56&fdeohfurvv8vhwkhfdeohwkdwixo¿oovwkhvshfl¿fdwlrq shown in the previous page. 3. Turn...

  • Page 8

    8 command control via the network (continued) requesting projector status (get command) (1) send the following request code from the pc to the projector. Header + command data (‘02h’ + ‘00h’ + type (2 bytes) + ‘00h’ + ‘00h’) (2) the projector returns the response code ‘1dh’ + data (2 bytes) to the p...

  • Page 9

    9 names operation type header command data crc action type setting code power set turn off be ef 03 06 00 2a d3 01 00 00 60 00 00 turn on be ef 03 06 00 ba d2 01 00 00 60 01 00 get be ef 03 06 00 19 d3 02 00 00 60 00 00 [example return] 00 00 01 00 02 00 [off] [on] [cool down] input source set compu...

  • Page 10

    10 command control via the network (continued) names operation type header command data crc action type setting code user gamma pattern set off be ef 03 06 00 fb fa 01 00 80 30 00 00 9 step gray scale be ef 03 06 00 6b fb 01 00 80 30 01 00 15 steps gray scale be ef 03 06 00 9b fb 01 00 80 30 02 00 r...

  • Page 11

    11 command control via the network (continued) names operation type header command data crc action type setting code color temp gain b get be ef 03 06 00 8c f5 02 00 b3 30 00 00 increment be ef 03 06 00 ea f5 04 00 b3 30 00 00 decrement be ef 03 06 00 3b f4 05 00 b3 30 00 00 color temp offset r get ...

  • Page 12

    12 command control via the network (continued) names operation type header command data crc action type setting code over scan get be ef 03 06 00 91 70 02 00 09 22 00 00 increment be ef 03 06 00 f7 70 04 00 09 22 00 00 decrement be ef 03 06 00 26 71 05 00 09 22 00 00 over scan reset execute be ef 03...

  • Page 13

    13 command control via the network (continued) names operation type header command data crc action type setting code computer in1 set sync on g on be ef 03 06 00 ce d6 01 00 10 20 03 00 sync on g off be ef 03 06 00 5e d7 01 00 10 20 02 00 get be ef 03 06 00 0d d6 02 00 10 20 00 00 computer in2 set s...

  • Page 14

    14 command control via the network (continued) rs-232c communication command table (continued) names operation type header command data crc action type setting code audio-computer1 set audio1 be ef 03 06 00 6e dc 01 00 30 20 01 00 audio2 be ef 03 06 00 9e dc 01 00 30 20 02 00 audio3 be ef 03 06 00 0...

  • Page 15

    15 command control via the network (continued) names operation type header command data crc action type setting code language set english be ef 03 06 00 f7 d3 01 00 05 30 00 00 franÇais be ef 03 06 00 67 d2 01 00 05 30 01 00 deutsch be ef 03 06 00 97 d2 01 00 05 30 02 00 espaÑol be ef 03 06 00 07 d3...

  • Page 16

    Command control via the network (continued) rs-232c communication command table (continued) names operation type header command data crc action type setting code auto keystone set turn off be ef 03 06 00 ea d1 01 00 0f 20 00 00 turn on be ef 03 06 00 7a d0 01 00 0f 20 01 00 get be ef 03 06 00 d9 d1 ...