3M Dual Manifold Water Filtration Systems Instruction Manual

Manual is about: High Flow Series Water Filtration Systems

Summary of Dual Manifold Water Filtration Systems

  • Page 1

    Installer: please leave this manual with owner/operator. Dual/triple manifold water filtration systems instruction manual high flow series water filtration systems 3m tm water filtration products.

  • Page 2: Safety Information

    3m ™ water filtration products table of contents safety information .......................................................................................................................................2 warning statements ...............................................................................

  • Page 3

    3 inlet and outlet connections the water inlet is on the left side rear and the outlet is on the right side front and are identified with labels. The fitting size is ¾” npt (male). A built-in check valve (non-return) is incorporated into the outlet. To reduce the risk associated with property damage d...

  • Page 4

    4 dual manifold filtration system product dimensions 5 3/8 in (13.5 cm) 16 7/8in (42.9 cm) to remove cartridge 3 in (7.62 cm) minimum hf9x series cartridge 24 1/16" (63.66 cm) hf6x series cartridge 18 1/16" (45.9 cm) hf4x series cartridge 15 1/16" ((38.3 cm) triple manifold filtration system product...

  • Page 5

    1 1 2 2 to release tubing to attach tubing push tubing straight in as far as it will go. Tubing is secured in. Push in collt to release tubing. Pull tubing straight out. Step 2 step 3 step 4 step 1 this product is outfitted with a user friendly ‘push in’ connector at the vent valve. Proper use of the...

  • Page 6

    Both manifolds may be used with metal or non-metallic piping systems. Important note: any non-metallic fittings used in the installations must be of adequate rating for the line pressure. 1. Shut off incoming cold water supply. 2. Select the installation location. Warning: allow a minimum of 3 in (7....

  • Page 7

    Cartridge change-out procedure cartridges will need to be changed every 12 months or when low pressure in indicated on the manifold outlet pressure gauge, whichever occurs first. Depending on local water quality, you may need to change the cartridges prior to the recommended change-out. The loss of fl...

  • Page 8

    6 item part no. Description qty* micron rating 1 6228405 dual manifold assembly 1 assembly, complete 2 60-2333700 vent valve (not shown) 1 release trapped air 3 see catalog replacement cartridges 1 water filtration 4 85005-49 pressure gauge 1 monitor outlet water pressure 5 85-8528 clip 1 retain inle...

  • Page 9

    7 item part no. Description qty* micron rating 1 6228405 triple manifold assembly 1 assembly, complete 2 60-2333700 vent valve 1 release trapped air 3 see catalog replacement cartridges 1 water filtration 4 85005-49 pressure gauge 1 monitor outlet water pressure 5 85-8528 clip 1 retain inlet/outlet fi...

  • Page 10

    3m purification inc. Warrants dual/triple manifold water filtration systems only to be free from defects in material and workmanship for one (1) year from the date of purchase. The disposable filter cartridge is warranted from defects in material and workmanship for a period of one (1) year from the da...

  • Page 11

    11.

  • Page 12

    3m is a trademark of 3m company. © 2013 3m company. All rights reserved. 34-8712-8017-7 please recycle. Printed in u.S.A. 3m purification inc. 400 research parkway meriden, ct 06450, usa toll free: 866.990.9785 worldwide: 203.237.5541 fax: 203.238.8701 www.3mfoodservice.Com www.3mpurification.Com 12.