3M DWS160-L Installation And Operating Instructions Manual - page 3
3
• Onplasticfittings,neverusepipesealantorpipedope.UsePTFEthreadtape
only, pipe dope properties
may deteriorate plastic.
• Takecarewhenusingpliersorpipewrenchestotightenplasticfittings,asdamagemayoccurifover-
tightening occurs.
•
Do not install in direct sunlight or outdoors.
•
Do not install near water pipes which will be in path of a drilling tool when selecting the position to
mount the bracket.
• Mountfilterinsuchapositionastopreventitfrombeingstruckbyotheritemsusedintheareaof
installation.
• Ensurethatthelocationandfastenerswillsupporttheweightofthesystemwheninstalled.
• Ensurealltubingandfittingsaresecureandfreeofleaks.
• Donotinstallunitifcolletismissing.Contactyoursalesrepresentativeifcolletsaremissingfrom
any fittings.
• Thedisposablefiltercartridge
MUST be replaced every 12 months, at the rated capacity or sooner if a
noticeablereductioninflowrateoccurs.
3M
TM
Water Filtration Products
DWS160-L System Part Number 56272-01
Specifications
Inlet Size: 3/8” NPT Fitting
Outlet Size: 3/8” NPT Fitting
Temperature Range: 40-100°F (4.4-37.8°C)
Pressure Range: 25-125 psi (172-862 kPa)
Dimensions - (16.25”H x 4”D) (41.3 cm x 10.2cm)
Parts Included
Filter Replacement Cartridge-Part Number 56134-44
Fixed Flow Control Head/Bracket Assembly-Part Number 62130-36
Vent Tubing Included in head assembly.
Vent Boss
Figure 1.A
IMPORTANT NOTES
•Failure to follow instructions will void warranty.
•Allow a minimum of 3" (7.6 cm) clear space under filter to facilitate cartridge change.
•Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.
•Some local codes may require the use of a licensed plumber or certified installer when
disrupting a potable water line.
16 1/4"
4"
6000 Gallons