3M MP7740 Operator's Manual - page 16

15

3M

™

 Multimedia Projector MP7640/MP7740

© 3M IPC 2001

Section 4: Adjustments and Functions

Plug & Play Function

Plug & Play is a system configured with peripheral equipment (including a computer and display), and a

compatible operating system. This allows the user to connect various peripheral equipment successfully

without having to adjust settings manually. The equipment and projector exchange this information automati-

cally. This projector is VESA DDC (Display Data Channel) 1/2B compatible. Plug & Play is possible by

connecting to a computer that is VESA DDC compatible.

✔

 Note: Use the RGB cable included with this projector when using plug & play. With other

cables, pins (12) - (15) are sometimes not connected (effective only for RGB1).

Freeze Function

The Freeze function is used to display (freeze) a single frame of the image being projected. This function can

be used with the Magnify function to freeze the image and then enlarge (magnify) part of the image to view it

in greater detail. Press the FREEZE button repeatedly to engage or disengage this function.

✔

 Note: The FREEZE function will turn off during the operation of the MENU, FOCUS,

VOLUME, MUTE, BLANK, TIMER, AUTO or POSITION functions.

Magnify Function

The Magnify function is used to enlarge a portion of the projected image. Press the MAGNIFY (+) button to

magnify the center of the displayed image. Press again to magnify up to 4x. Press the MAGNIFY (-) button to

reduce image size. Press OFF to return to normal image size. To move the display area being magnified, press

the POSITION button, then use the DISC PAD to move the magnified area up, down, left or right.

✔

 Note: To return to normal display, press the MAGNIFY OFF button. The MAGNIFY function

will turn off during the operation of the KEYSTONE or AUTO functions.