3M NI-100 Quick Start
of
2
3M
TM
Noise Indicator NI-100
Operating the Noise Indicator
1. Attach the NI-100 with badge clip to shirt/jacket where
it is easily visible.
2. To turn
On, press and hold button until solid red
and green lights appear. Release
button.
•
Flashing Green, with 1 sec. intervals, indicates noise
level is below 85 dBA.
•
Flashing Red, with 1 sec. intervals, indicates
noise level is above 85 dBA.
3. To turn
Off, press and hold button while the LEDs
illuminate solid red and green and then disappear.
Release
button.
*
NOTE: If not manually turned off, the noise
indicator will automatically power off after approximately 10 hours.
Green LED
Red LED
On/Off button
Clip
QU
IC
K
ST
AR
T