January 2011 • 78-6971-1572-9 • copyright © 2011, 3m company. All rights reserved. Operator’s guide 3 super close projection system scp725.
3 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h contents introduction thank you for choosing 3m equipment ......................................................................................................5 trademarks ........................
4 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h menu navigation main menu ...................................................................................................................................................22 input menu ..........
5 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h introduction thank you for choosing 3m equipment this product has been produced in accordance with 3m’s quality and safety standards to provide smooth and trouble free use in the years to come. ...
6 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h original 3m product’s warranty period as stated above. For warranty service, you must provide proof of the date of the original purchase else the manufacturing code date will be used to establis...
7 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h what 3m will do to correct problems: • if your 3m product requires service, 3m will ask you to bring or send the 3m product, securely packaged in its original container or equivalent, along with...
8 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h ce statement electromagnetic compatibility statement: meets 2004/108/ec directive low voltage directive: meets 2006-95-ec directive. Weee statement: the following information is only for eu-memb...
9 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h safety information please read, understand, and follow all safety information contained in these instructions prior to the use of this projector. Retain these instructions for future reference. ...
10 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h m warning to reduce the risk associated with hazardous voltage: • do not operate this projector in wet environments or outdoors. • do not modify this projector or power cord. • do not remove an...
11 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h m caution to reduce the risk associated with eye strain, nausea, dizziness, headache: • take a break every hour for 15 minutes. • do not view 3d images or 3d full motion videos while standing o...
12 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h safety labels the following safety labels are used on this product..
13 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h contents of shipping box this projector is shipped with the necessary cables required for standard dvd player, pc or laptop computer connections. Carefully unpack and verify that you have all o...
14 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h product description the 3m scp725 integrates short-arc lamp and digital light processing™ (dlp) technology. It accepts input from computer and/or video sources and projects a bright image throu...
15 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h projector distance from screen and image size refer to the chart below for the projector-to-screen distance and corresponding projected image size values. Image size distance (d) offset min (s)...
16 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h parts identification 1. Super close projection lens 2. Focus adjustment 3. Lens-shift 4. Remote control ir sensor 5. Status indicator light 6. Standby/on button 7. Lamp cover 8. Ventilation slo...
17 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h i/o module control panel (optional accessory) if your projector has the optional i/o module installed, the projector functions can be operated from the i/o module control panel. 4 3 5 6 1 2 # i...
18 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h bottom terminal panel on i/o module use the bottom terminal panel to connect the i/o module box to the computer/video source. I/o module 7 8 9 10 11 12 13 1 2 3 4 5 6 # bottom terminal panel fu...
19 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h remote control functions use a usb cable to connect from the pc to the scp725 or scp i/o module ( if equipped ) and aim the remote control toward the projection screen or at the ir sensor on th...
20 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h installing batteries in remote control 1. Push down on cover to unlatch it. Slide cover off. 2. Install new aaa batteries with the correct polarities. 3. Reinstall battery cover. Note: verify t...
21 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h operating instructions projector start up read the important safeguards before operating the scp725. After all cable connections have been completed, refer to setup and configuration, the proje...
22 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h menu navigation to display the on screen menus, press the menu button on the remote control or i/o module. Use the remote control up/down arrow buttons to select the desired menu (see table bel...
23 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h input menu the input menu, shown below, is used to select the desired computer or video input source to be displayed on the projector. Input input source: computer 1 computer 1 / component 1 co...
24 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h picture menu the picture menu, shown below, is used to adjust the picture settings to display the best possible image. Picture input source: computer 1 picture mode enhanced photo brightness 50...
25 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h advanced picture menu the picture menu with the advanced option selected, shown below, is used to adjust the projected image for computer and component inputs only. Picture input source: comput...
26 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h audio menu (menu displays only if i/o module is connected) the audio menu, shown below, is used to adjust the audio settings and select the audio input source to play through the projector. Aud...
28 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h advanced setup menu the advanced setup menu, shown below, is used to initiate the pin code feature (turn on/off) and set the pin code. Advanced setup input source: computer 1 pin authentication...
29 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h information menu the information menu, shown below, is used to display current projector configuration settings. Information input source: computer 1 input resolution 1024 x 768 h frequency 31....
30 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h machine specifications item specification acoustic noise level bright mode: typical 34 db(a) normal mode: typical 32 db(a) eco mode: typical 28.5 db(a) auto detect & install automatically recog...
31 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h maintenance lamp replacement www.Lamprecycle.Org hg 11 10 6 12 1 2 3 4 5 7 8 9 note: refer to the setup menu to reset the lamp hour timer after replacing the lamp. E n g l is h.
32 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h cleaning the air vents for best performance, 3m recommends that you periodically dust the projector and vacuum all air vents on the projector. Follow the procedures below. 1. Return projector t...
33 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h cleaning the lamp module and lamp compartment for best lamp performance, there must be adequate air flow through and around the lamp module. A build up of dust or dirt will reduce the air flow ...
34 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h 4. Install the lamp taking care to seat it fully into the lamp socket connection and tighten the lamp retaining screws. 5. Replace the lamp door and secure it with the retaining screws. 6. Veri...
35 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h troubleshooting identifying an expired lamp module lamp module parts 1 2 3 3 1 2 3 4 5 1. Top of lamp module 2. Lamp connector 3. Air vents 4. Lamp wires 5. Bulb envelope - this is the shape of...
36 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h i/o module troubleshooting symptom possible cause solution the standby button on the i/o module does not light while the projector is powered on. The communication cable is not connected or is ...
37 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h symptom standby button state possible cause action the lamp will not ignite red the projector is cooling down. Wait until the projector completes its cooling cycle. Once the standby button turn...
38 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h symptom standby button state possible cause action no image green the desired input source is not selected. Press the remote control input button to select a desired input source. The cables fr...
39 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h symptom standby button state possible cause action desired input source cannot be detected the input source is not active. A signal must be present for the input to be selected. Connect an acti...
40 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h replacement parts and accessories replacement parts name of part 3m part number vga cable, 1.8 m 78-8134-7029-7 remote control 78-8134-7200-4 scp725/scp725w lamp replacement 78-6969-9996-6 opti...
41 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h.
42 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h.
43 operator’s guide 3m ™ super close projection system scp725 © 3m 2011. All rights reserved. E n g l is h.
Important notice all statements, technical information, and recommendations related to 3m’s products are based on in- formation believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intend...
