3m personal safety division 3m tm soundpro se/dl series sound level meters soundpro quick start guide.
1. To turn on the soundpro, press the key until the start screen appears. 2. To navigate, press the up/down arrows and left/right arrows for most of the navigational functions. The key is used to move back one level (or escape from a menu/screen). Press repeatedly to return to the start screen. \ th...
1. Ensure the soundpro is turned on and is either stopped or paused. 2. Attach the calibrator and cal adapter to the soundpro. Set the calibrator to 1 khz and 114 db (if it is a selectable). 3. From the start screen, press the cal softkey and the cal screen will open. Press when calibrate is highlig...
Filtered bar chart screen for the filtered bar chart screen, the dominant characteristic of this screen is the multi-element bar chart. The chart displays measurements in each filter band and broadband values for both meters. For octave band analysis, the screen contains 13 bars (11 for filters and ...
Viewing data and data finder page 1. Communicating/connecting the soundpro to the pc a. Turn on the sound pro. B. Plug in usb cable from soundpro to pc. 3. Soundpro and downloading a. Select the slm family and the soundpro mode from the instrument window (see a). Click on “ go to session finder afte...
Personal safety division 3m detection solutions iso 9001 registered company iso 17025 accredited calibration lab 1060 corporate center drive oconomowoc, wi 53066 customer service: 262-567-9157 toll free: 800-245-0779 3m and soundpro are trademarks of 3m company, used under license in canada. Please ...
