3M VOL-1081 User Manual

Manual is about: Fast Ethernet Mini-switch 8+1

Summary of VOL-1081

  • Page 1

    Vol-1081 fast ethernet mini-switch 8+1 user guide tm ÿ ÿ ÿ ÿ innovation volition tm network solutions.

  • Page 2

    Page 2 this page left blank intentionally.

  • Page 3: Contents

    Page 3 contents 1. Introduction...................................................................................................... 4 figure 1-1. The vol-1081 fiber switch .........................................................................4 features .............................................

  • Page 4: 1. Introduction

    Page 4 1. Introduction the vol-1081 mini-switch is a compact desktop size switch that is ideal for small office or home office networks. It provides wire-speed, fast ethernet switching offering high- performance at low-cost. Figure 1-1. The vol-1081 fiber switch ÿ the vol-1081 mini-switch provides 8...

  • Page 5: 2. Hardware Description

    Page 5 2. Hardware description the vol-1081 mini-switch is a compact switch with 8x 10/100 n-way utp switch ports plus one 100base-fx fiber port. Front panel ÿ the front panel of the vol-1081 mini-switch consists of 8x 10/100 n-way utp switch ports (automatic mdi/mdix), one 100base-fx fiber port and...

  • Page 6

    Page 6 led indicators ÿ the following table describes the led status and description. The leds provide a real-time indication of system conditions. Rear panel the 3-pronged power plug is located at the rear panel of the mini-switch as shown in figure 2-2. The switch will work with 100-240v ac, 50-60...

  • Page 7

    Page 7 desktop installation ÿ set the switch on a clean, smooth, level, and sturdy surface with a power outlet nearby. ÿ make sure there is enough clearance around the switch to allow attachment of cables, power cord and air circulation. Attaching rubber feet ÿ make sure the surface on the bottom of...

  • Page 8: 3. Network Application

    Page 8 3. Network application this section provides an example of network topology in which the switch is used. In general, the vol-1081 mini-switch is designed to be used as a desktop or segment switch. You can use the vol-1081 mini-switch to connect pcs, workstations, and servers to each other by ...

  • Page 9: 4. Trouble Shooting

    Page 9 4. Trouble shooting this troubleshooting section is intended to help you solve the most common problems on the vol-1081 fiber switch. The switch can be easily monitored through panel indicators to assist in identifying problems. This section describes common problems you may encounter and whe...

  • Page 10

    Page 10 5. Technical specifications - vol-1081 mini-switch interfaces and cabling copper connector rj-45 / 8 ports impedance 100 ohm network cables and distances utp - 10base-t: 2-pair cat. 3, 4, 5 cable (100m), utp - 100base-tx: 2-pair cat. 5 cable (100m), eia/tia-568 100-ohm stp (100m) fiber conne...

  • Page 11: 6.0 Agency Approvals

    Page 11 power requirements ac input 100 to 240 volts ac, 50 to 60hz power consumption max. 12 watts physical and environmental specifications dimensions switch 250 x 132 x 37 mm l x w x h, (9.84 x 5.19 x 1.47 inches) weight switch 1.01 kg (2.2 lbs.) temperature operating storage 0 to 45 °c (32 to 11...

  • Page 12

    Page 12 3m, volition, vf-45, and the “dot wave” symbol are trademarks of 3m important notice before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; limited remedy; limited l...