3M Volition VOL-0201 Installation Instructions - page 2
Twisted Pair
(RJ45) Port
Power Connector
The 3M Volition™ 10BaseT to 10BaseFL
media converter is an inexpensive device
used to connect a fiber-to-the-desk cable
(VF-45™) installation to a personal
computer (PC). The media converter is
used to connect to a 10BaseT Network
Interface Card (NIC) in a PC, and convert
copper signals to fiber. The Volition™
Ethernet™ media converter is specified
to operate over 2 km of standard
62.5/125 um multimode optical fiber.
Caution: Use only a 3M supplied power
adapter with this unit. If a power
adapter other than one supplied by 3M is
used, it may destroy the media converter
and will void any warranty.
Installation
Mount the media converter at a
convenient location by the PC and
ensure that the cords are not stretched.
3M Scotchmate™ hook and loop
fasteners are included to attach the
media converter to a surface, such as a
computer or desk.
The Volition™ Media Converter complies
with the following standards.
Functional: IEEE 802.3 10BaseFL
Safety: UL 1950, EN 60950,
CSA 22.2#950
Electromagnetic Emissions:
FCC Part 15, Class B.
EN 55022, Class B.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful
interference, and
2.
This device must accept any
interference received, including
interference that may cause
undesired operation.
Volition™ VF-
45™ Fiber Plug
Port
"TP" LED
(Twisted Pair
Indicator)
"FL" LED
(Fiber Link Indicator)
78-8097-5586-7 5/11/98 1:37 PM Page 2