1. DL manuals
  2. 3onedata
  3. Network Router
  4. IES605-2D series
  5. User Manual

3onedata IES605-2D series User Manual

Summary of IES605-2D series

  • Page 1

    Ies605-2d series industrial ethernet switch user manual shenzhen 3onedata technology co.,ltd tel: +86-755-26702668 fax: +86-755-26703485 www.3onedata.Com.

  • Page 2: Summarize】

    【 summarize】 iies605-2d series is an industrial, management, redundant industrial ethernet switch and integrate 2 port serial device servers. It included 1. Ies605-2d (rs-232)-p (12/48vdc), support 5 port 10/100base t(x) and 2 port rs-232, 2. Ies605-2di (rs-485)-p (12/48vdc), support 5 port 10/100ba...

  • Page 3: Features】

    Industrial ethernet switch(ies605-2d series)ⅹ 1 user manual ⅹ 1 cd ⅹ 1 certificate of quality ⅹ 1 warranty card ⅹ 1 please inform us or our distributor if your equipments have been damaged or lost any accessories, we will try our best to satisfy you. 【 features】 ieee802.3, ieee802.3u, ieee 802.3x su...

  • Page 4

    Back view top and below view ies605-2d（rs-232）-p(12/48vdc) 1. Pwr1/pwr2 power supply 2. Ground screw 3. Relay output terminal block 4. Dip switch (4 bits) 5. Din-rail 6. Led indicator 7. 10/100base-tx rj45 port 8. Rs-232 port ies605-2di（rs-485）-p(12/48vdc) 1. Pwr1/pwr2 power supply 2. Ground screw 3...

  • Page 5

    Ies605-1f-2d（rs-232）-p(12/48vdc) 1. Pwr1/pwr2 power supply 2. Ground screw 3. Relay output terminal block 4. Dip switch (4 bits) 5. Din-rail 6. Led indicator 7. 100base-fx fiber port 8. Rs-232 port 9. 10/100base-tx rj45 port ies605-1f-2di（rs-485）-p(12/48vdc) 1. Pwr1/pwr2 power supply 2. Ground screw...

  • Page 6: Unit (Mm)

    7. 100base-fx fiber port 8. Rs-232 port 9. 10/100base-tx rj45 port ies605-2f-2di（rs-485）-p(12/48vdc) 1. Pwr1/pwr2 power supply 2. Ground screw 3. Relay output terminal block 4. Dip switch (4 bits) 5. Din-rail 6. Led indicator 7. 100base-fx fiber port 8. Rs-485/422 port 9. 10/100base-tx rj45 port 【 a...

  • Page 7: Power Supply Input】

    【 power supply input】 vertical view top view ies605-2d series provide 4 bits industry terminal block (v1-, v1+, v2-, v2+）), v-, v+ is 12～48vdc power supply input. Ies605-2d series dc power supply input supported redundancy function, provided pwr1 and pwr2 power input, can use for single, and can con...

  • Page 8: Communication Connector】

    Configure（off is default factory）,1 and 2 keep for future function. 3 is for upgrade. 4 is recovery default factory. Please power off and power on when you change the status of dip switch. 【 communication connector】 10/100baset(x) ethernet port the pinout of rj45 port display as below, connect by ut...

  • Page 9: Mdi-X (Cross Over Cable)

    Mdi-x (cross over cable) mdi/mdi-x auto connection makes ies605-2d easy to use for customers without considering the type of network cable. 100base-fx fiber port 100base-fx full-duplex sm or mm port, sc/st/fc type .The fiber port must be used in pair, tx (transmit) port connect remote switch’s rx (r...

  • Page 10: Pin

    Pin rs-232 1 dcd 2 rxd 3 txd 4 dtr 5 gnd 6 dsr 7 rts 8 cts 9 — db9 male (rs-232) rs-485/422 port: pin rs-422 rs-485 1 t+ d+ 2 t- d- 3 gnd / 4 r+ / 5 r- / rs-485/422 【 led indicator】 ies605-2d series led indicator light on the front panel .The function of each led is described in the table as below:.

  • Page 11: Led

    System status led led indicator description pwr1 on p1 connection regularly off p1 power supply have no connection or unwonted pwr2 on p2 connection regularly off p2 power supply have no connection or unwonted alarm on power, port have alarm off power, port have no alarm run on device unwonted blink...

  • Page 12: Din Rail Installation

    3. Examine whether the cables be seemly or not (less than 100m) according to reasonable scheme. 4. Screw, nut, tool provide by yourself. 5. Power: redundant 12-48vdc o power input 6. Environment: working temperature -40～75℃ relative humidity 5%～95% din rail installation in order to use in industrial...

  • Page 13: Specification】

    Laying position need to match construction requirements, and cable length depends on actual position; 4. All the cable cannot have break-down and terminal in the middle; 5. Cables should be straight in the hallways and turning; 6. Cable should be straight in the groove, and cannot beyond the groove ...

  • Page 14: Interface

    Interface 100m ethernet: 10/100base-tx self-adapt rj45 port. 100m fiber port: 100base-fx (sc/st/fc) alarm port: 2 bit 7.62mm terminal block, 1 channel relay alarm output serial rs-232 signal: txd, rxd, rts, cts, dtr, dsr, gnd rs-422 signal: t+, t-, r+, r-, gnd rs-485 signal: d+, d-, gnd parity: none...

  • Page 15: Power Supply

    System indicator: run ethernet port indicator: link/act（1-5） serial port indicator: tx (1-2), rx (1-2) power supply input voltage: 24vdc (12~48vdc) terminal block: 4 bits 7.62mm terminal block ies605-2d（rs-232）-p(12/48vdc) none load consumption: 0.9w@24vdc full load consumption: 1.6 w@24vdc ies605-2...

  • Page 16: Environmental

    Dimension（w×h×d）: 136mm×52mm×105mm weight: 900g environmental operating temperature: -45°c to 75°c storage temperature: -45°c to 85°c relative humidity: 10 to 95% (non-condensing) standard emi: fcc part 15, cispr (en55022) class a ems: en61000-4-2 (esd), level 4 en61000-4-3(rs), level 3 en61000-4-4 ...