1. DL manuals
  2. 3r-global
  3. DVR
  4. STANDARD 16
  5. User Manual

3r-global STANDARD 16 User Manual

Summary of STANDARD 16

  • Page 1

    1 digital video recorder user’s manual 3r standard04/08/16.

  • Page 2

    2 thank you for using our product. 1. This is user's manual for h.264 4ch, 8ch and 16ch dvr (digital video recorder). 2. This manual contains product specification and introduction, installation guide, operating guide and other necessary matters for easy understanding. Users should read this user's ...

  • Page 3: Contents

    3 contents ch 1. Product introduction 1-1. Product contents 5 1-2. Specifications 6 1-3. Product characteristics 7 1-4. Name of each part 9 ch 2. Installation guide and cautions 2-1. Cautions 11 2-2. Product installation 14 2-2-1. Power connection 14 2-2-2. Connecting external device 14 ch 3. How to...

  • Page 4: Contents

    4 contents ch 4. Client program 46 4-1. Installing client program 46 4-2. How to use client program 51 4-2-1. Initial screen 52 4-2-2. Connecting the dvr 56 4-2-3. Initial screen after connection 57 4-2-4 watch-live viewing 58 4-2-5. Favorite – multiple dvr connection 59 4-2-6. Search-playback 62 4-...

  • Page 5: Ch1. Product Introduction

    5 1-1. Product contents after removing packing materials of this product, check whether all following contents are included. Main body (dvr): this converts the analog video and audio signal to the digital signal and saves on hdd. Adapter: this 12v adapter supplies power to the product. Power cable: ...

  • Page 6

    6 1-2. Specifications image input/output : ntsc / pal recording speed : ntsc - 1~123fps(4ch), 1~127(8ch), 1~135fps(16ch) : based on 360x240 pal - 1~103fps(4ch), 1~107(8ch), 1~115fps(16ch) : based on 360x288 compression method : h.264 technology power : dc12v, 4.0a (dc adapter) power consumption : 34...

  • Page 7

    7 1-3. Product characteristics 1) high quality picture this enables recording and playing high quality digital image based on h.264 compression method. 2) high reliability with embedded hardware and software design, this maintains higher product reliability compared to common pc type products. 3) si...

  • Page 8

    8 12) p/t/z control by built in rs485, various p/t/z cameras can be used. 13) individual resolution setting you can record in each channel by choosing 360x240, 720x240 and 720x480 individually. 14) separate video transmission engine dvr can send 60 fps (based on cif) regardless of the local recordin...

  • Page 9

    9 1-4. Name of each part [front panel] 1. Ir window : the window for remote controller 2. Usb ports : these usb ports are for mouse and usb devices. You should connect correctly the usb devices and mouse as picture directed. 3. Status lamps power : blue color back light. Power indicator. Record : re...

  • Page 10

    10 1. Cooling fan 2. Video in: this receives images from cameras and sends them to monitors. 3. Lan port: this is lan cable connection terminal. 4. Video out : for main monitor. 5. Vga port: video output for vga display 6. Dc power : dc12v 4.0a 7. Rs485 port : for control the pan and tile cameras. M...

  • Page 11: Warning

    11 2-1. Cautions - avoid installing the product where there are direct rays or it is hot by locating near from heat generator. (may cause fire) - do not put vase, flowerpot, cup, cosmetics, drug, and anything the contain water on product. (may cause fire or electric shock, and it may injure people b...

  • Page 12

    12 - keep the power cord untwisted. (may cause fire or electric shock.) - use proper adapter. (using too much electric power may cause fire or electric shock.) - do not install it at where exposed to rain and wind and water drop. (may cause fire, electric shock and transformation.) - keep away from ...

  • Page 13

    13 ch 2 installation method and cautions note : this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operate...

  • Page 14

    14 2-2 product installation this product may be composed of camera and monitor in default, and additionally the sensor, microphone, speaker and pc for network can be connected if necessary. 2-2-1. Power connection 1) connect adapter cable to power connection terminal at rear side. 2) input ac power ...

  • Page 15

    15 siren power - + sensor sensor in : connect the sensors. The sensor are composed of both signal and ground terminals, with a voltage difference of 5v. In the case that the sensor used for input is of the n/o (normal open) type, when the voltage difference between the signal and ground falls to 0v ...

  • Page 16

    16 4) connection using ptz camera in case of using pan and tilt cameras, connect pan/tilt drive to product as shown at following figure. Ch 2 installation method and cautions 5) installing hard disk drive in case of installing the hard disk drive, open the upper case and install the hard disk drive ...

  • Page 17

    17 connecting external device(8 and 16 ch) ※ connect it when power of the product is off. ※ read through user's manual for the device you are connecting carefully. 1) how to connect external video/audio device connect cameras to video in by channels. Connect microphone (amp) to audio in by channels....

  • Page 18

    18 sensor in : connect the sensors. The sensor are composed of both signal and ground terminals, with a voltage difference of 5v. In the case that the sensor used for input is of the n/o (normal open) type, when the voltage difference between the signal and ground falls to 0v (short), the dvr can us...

  • Page 19

    19 4) connection using ptz camera in case of using pan and tilt cameras, connect pan/tilt drive to product as shown at following figure. Ch 2 installation method and cautions 5) installing hard disk drive in case of installing the hard disk drive, open the upper case and install the hard disk drive ...

  • Page 20: Ch3. How to Use

    20 3-1. General usage information the standard series dvr can be operated with a mouse or remote controller under the four main modes listed below: live mode – this is the “main or default” mode. From this mode you can view in real time all currently operating cameras, information regarding camera s...

  • Page 21

    21 3-2. Live mode in this section you will know how to split the video mode into 1, 4, 6, 8, 9, 12, 16, as well as auto sequencing, ptz control, mouse control, setup configurations, backup ch 3 how to use 3-2-1. Live mode control sensor activation indicator motion detection indicator event recording...

  • Page 22

    22 ch 3 how to use mute indicator audio out channel indicator scheduler activation indicator lock/ unlock indicator hard drive usage sequence activation screen split mode change time date 3) live popup menu by right-clicking anywhere on live screen, you may view the live popup menu. By using the liv...

  • Page 23

    23 ch 3 how to use 3-2-2. Live mode feature 1) split change video split mode for live view. 4ch : 1/4 split mode 8ch : 1/4/6/8/9 split mode 16ch : 1/4/6/8/9/13/16 split mode 2) instant replay this is very convenient function to catch the abrupt accident. During live viewing, you can go directly to t...

  • Page 24

    24 • setup : if you press setup using mouse (or menu button on the remote controller) in ptz menu, ptz setup window will appear. You can set the pan and tilt speed, 32 preset name and tour sequence as well as dwelling time, 3) ptz (pan, tilt and zoom) it is possible to control the pan and tilt camer...

  • Page 25

    25 ch 3 how to use •preset : you can enter the preset number using the keypad appearing the preset button or ‘enter’ button on the remote controller. 5) osd this feature shows current settings of product through gui (graphic user interface) and info button at front side is used for this feature. Whe...

  • Page 26

    26 ch 3 how to use 7) zoom digital zoom of live screen for selected channel. It can be 2x zoom and also control the position by mouse dragging. 6) lock/log in logs off current user and locks dvr from any further configuration and screen setup until next administrator logs in..

  • Page 27

    27 search mode consists of two different modes of searching. The video data can be selected by time or event. 3-3. Search mode ch 3 how to use search month / day / time selection. Select from event log 3-3-1. Search selection type 1) time based search selection - select the date you wish to view by ...

  • Page 28

    28 ch 3 how to use 2) event based search selection - select search date from calendar - event log will be displayed according to the chosen date - preview pane above the event log will show preview of currently selected video - you may click on refresh, option, backup, import, to live, to play for a...

  • Page 29

    29 ch 3 how to use 3-3-2. Play mode if you choose ‘to play’, the full screen appear. You can control the play speed in here. ▶ play screen gui 1. Split screen 2. Sequence 3. Fb (fast backward): fb×2, 4, 8, 16, 32, 64 times faster 4. Playback : backward normal speed 5. Sb (slow bacward):sbx1/2, sbx1/...

  • Page 30

    30 3-4. Setup mode access setup menu from right clicking mouse button to popup menu. Configure display, record, device, network, system which is navigated by clicking on corresponding tab menu at the top of the screen 3-4-1. Display configure osd, main display, color control setting. Ch 3 how to use...

  • Page 31

    31 ch 3 how to use 2) main display configure and view monitor, switching dwell time settings. Monitor option is valid for 8 and 16ch only. Monitor : you can choose the monitor between vga and composite. The screen size will be optimized with the selected monitor. Switching dwell time: set time for s...

  • Page 32

    32 ch 3 how to use 3-4-2. Record configure and view event in, record, group, holiday settings 1) record with this menu, you can set the recording variables of dvr and the scheduler. [when select scheduler off] if you select scheduler off, scheduler recording setting window disappears and a window to...

  • Page 33

    33 ③ quality: set picture quality. As quality gets higher, screen quality gets better but saving period gets shorter because file size gets bigger. There are 4 steps quality such as super, high, medium and low to save the setting, choose ‘apply’ after setting. 4) event recording this is a window set...

  • Page 34

    34 *in recording, schedule recording setting is most preferred. So if you activate the weekly scheduler, you cannot record manually. Ch 3 how to use 2) group with this menu, you can set the group using the scheduler. If you choose ‘group’ tab, you can see the similar screen with ‘record’. The settin...

  • Page 35

    35 ch 3 how to use 3) holiday with this menu, you can set the group using the scheduler. If you choose ‘group’ tab, you can see the similar screen with ‘record’. The setting is similar..

  • Page 36

    36 ch 3 how to use 4) event in with this menu, you can set sensor input, motion detection setup. You can also set each channel individually. Each channel may be configured to m (motion) / s (sensor) / v (both) * summary regarding as event recording *in rec menu, md recording, sensor detection record...

  • Page 37

    37 ch 3 how to use 3-4-3. Device configure and view camera, audio, motion detection, alarm out, ptz settings 1) camera you may configure and/or view camera video type and general camera configuration. •channel name: you can set the camera name. •disable : disable current camera. It is useful when th...

  • Page 38

    38 ch 3 how to use 3) motion detection change settings for motion grid selection and sensitivity level ① sensitivity.: 3 steps ② all on/off : this will activate or deactivate the motion detection of the all area. ③ apply all : apply the setting to whole channel 4) alarm out there are 3 types trigger...

  • Page 39

    39 ch 3 how to use • duration time from 000 seconds to 999 seconds • sensor type: selectable option is n.O. (normally open) / n.C. (normally close).

  • Page 40

    40 ch 3 how to use 5) ptz configure pan/tilt/zoom camera for control via dvr system and remote client driver: choose driver to be suitable for pan/tilt camera manufacturer. You have to set comport value according to the connected camera. There are more kinds of camera which can be supported. Please ...

  • Page 41

    41 3-4-4. Network configure and view status, address, port, ddns, e-mail settings ch 3 how to use • dvr name : type the url of dvr using virtual keyboard. • type : choose between ethernet and pppoe • dhcp (dynamic host configuration protocol) set whether you want to use dhcp or not (on/off) if you c...

  • Page 42

    42 ① connected ip : this displays all the connected ip. ② watch user: this displays how many connection for live viewing. ③ search user: this displays how many connection for playback. ④ setup user: this displays how many connection for dvr setting. ⑤ speed : this displays the practical bandwidth of...

  • Page 43

    43 ch 3 how to use 1) date/time •time zone: choose the time zone of your site. If you using the ntp function, it must be set correctly to your zone. •daylight saving time: it enables to adapt the day light saving time automatically. • date/time: this sets product time. Input time by pressing number ...

  • Page 44

    44 ch 3 how to use 3) storage 4) system log you may view all system administration log from setup Æ system Æ system log. •display the information and usage of the hard disk drives. If you press the ‘format’ button on each hdd, only that hdd will be formatted. •total : display all the hdd usage being...

  • Page 45

    45 ch 3 how to use 5) firmware shown at the following screen, from setup Æ system Æ firmware, you may view the current firmware version as well as upgrade the firmware and additionally, export, import, and default dvr configuration..

  • Page 46: Ch4. Client Program

    46 ※ this client s/w sends and receives the huge amount of data. So it will be recommended not to execute with the other application program. Failure may be happen at that case. Especially vaccine program may make a trouble on live and playback. This program supports windows 98, 2000, me, xp and vis...

  • Page 47

    47 ch 5 client program ▶ available vga - chipset from nvidia: geforce 4- higher than 64mb - chipset form ati: radeon - higher than 64mb - chipset from matrox: g450 - higher than 64mb - chipset from intel: higher than 64mb if you use a chipsets with lower specifications compared to the above benders,...

  • Page 48

    48 ① open cd-rom drive and run setup.Exe and then appear setup menu. ② click ‘next’. Ch 5 client program.

  • Page 49

    49 ③ ask designate folder to install the program recommend basic setup c:\program files\digital video recorder \dvr client click next. ④ showing progress of copy of files. Ch 5 client program.

  • Page 50

    50 ⑤ click ‘next’ ⑥ when finishing installation, click ‘finish’. ⑦ finish program installation ch 5 client program.

  • Page 51

    51 4-2. How to use client program if you execute client program, you will see following password screen. After entering the right password ( default is none ), you can do remotely seeing live image on dvr through client program, and you can do searching, playback and setup the dvr. Ch 5 client progr...

  • Page 52

    52 ② setting : to go to the setup screen minimize : to minimize the client software window maximize : to maximize the picture. You can use the full monitor screen to see the picture. If you want to back to main screen, use the ‘esc’ or mouse right button. Exit : to quit the client software ① display...

  • Page 53

    53 ch 5 client program client software password setup : the setting about password start – if choosing, it will ask the password on starting. Setting – if choosing, it will ask the password in order to enter the setting password change – changing the password setup option : choosing the remote setup...

  • Page 54

    54 ④ favorite : you can connect multi-dvr using this. You can also make a list of ip addresses you frequently use for your convenient use. Site : this shows the dvr list which you want connect. Add : you can add new ip address. Edit : you can edit ip addresses and other connection information on the...

  • Page 55

    55 ⑤ this shows the network speed and frame rates per channel. Site mode – it is possible to send up to 7.5 frames per second on 16 channel screen in watch mode and 30 frames per second on 1channel screen. Favorite mode – it is possible to send 30 frames per second in each channel. However it is dep...

  • Page 56

    56 4-2-2. Connecting the dvr if you click ‘add’ button at lower right corner of initial screen , you will see ‘site add’ window. You can add the wanted dvr in this window. Group – you can set the group of dvr. You can choose the existing group or make the new dvr group with ‘new’ button. Name – you ...

  • Page 57

    57 4-2-3. Initial screen after connection choose the dvr on the ‘site’ list and click the ‘connect’ button. You can see the live screen of the selected dvr. If you choose ‘favorite’ button, you can connect many dvr at the same time and also you can make your own favorite dvr group. Ch 5 client progr...

  • Page 58

    58 4-2-4. Watch – live viewing if you choose ‘control’ button after connection, you can see the control screen. ① channel selection ② display mode selection ③ ptz control : you can control the ptz camera . ④ snap shot : used for getting snap shot. You can save with jpg or bmp. Refer to 5-2-6. ⑤ opti...

  • Page 59

    59 4-2-5. Favorite – multiple dvr connection ch 5 client program in favorite mode, you can make your favorite multiple connection lists by pressing the ‘add’ button or dragging from the ‘site’ lists. If you press the ‘add’ button in favorite mode, the upper window will appear. The left side of the w...

  • Page 60

    60 ch 5 client program if you press the connect button after selecting the favorite list, the below window appears and you can watch simultaneously up to 64 channels. This favorite mode only can be adapted to the ‘watch’ mode not a ‘search’ mode and ‘setup’ mode..

  • Page 61

    61 ch 5 client program if you click the mouse right button from the upper screen and select the ‘add to favo list’, the favorite editing window appears and you can add the new connection to the list. You can register the dvr or individual channel to the favorite list directly not to make the list. Y...

  • Page 62

    62 ① channel and display mode selection ② play speed control buttons fast backward.(1,2,4,8,16,32,64 times faster). Pause playback fast forward.(1,2,4,8,16,32,64 times faster). Normal playback. 4-2-6. Search – playback if you choose ‘search’ button after connection, you can go to the playback mode. ...

  • Page 63

    63 to play slowly forward.(1/2,1/4 times slower) to play slowly backward.(1/2,1/4 times slower) to go to the next image to go to the previous image ③ time : you can search by hour. Event : you can search the event file from event list. ④ calendar : you can select the date directly. When you choose t...

  • Page 64

    64 snapshot : this is the feature to capture the image in live or playback as well as saving and printing it. If you press this button, following image window will be appeared. Zoom in : you can enlarge the image, every time you click the button, it will enlarge the picture up to 4 times. (click and...

  • Page 65

    65 osd option : this turns the osd on/off on live viewing. Favorite mode max fps : you can adjust the maximum frame rate individually upon ‘favorite’ connection. If you choose ‘auto’, the program chooses the optimum rates based on the pc and network speed. Search option : changing the search option ...

  • Page 66

    66 4-2-7. Setup – remote setup of dvr you can change the preferences of the dvr remotely. Click the ‘setup’ button to set up the dvr remotely and setup screen will appear. You can see the same gui of the dvr. Therefore, you are able to set as like as in front of the dvr. Ch 5 client program.

  • Page 67

    67 after installing the client software, you can find the ‘netdownloader program’ in the window programs (start -> programs -> dvr client -> netdownloader) . Please execute this ‘net downloader program’ to upgrade the firmware of the dvr. After typing the ip and password of the dvr, click the ‘conne...

  • Page 68: ☞ Warning!!!

    68 when you connect the dvr, click the ‘open’ button on the ‘netdownloader program ’and select the update file and then press the ‘start’ button. You can see the below download window on the dvr screen. ☞ warning!!! Do not turn off the power during download procedure. If you power off manually, all ...

  • Page 69

    69 this dvr has built in web server. You can monitor and control the ptz camera using the web browser. Type the ip or domain address to connect the dvr. Then type the user id (admin or user) and the password of the dvr. You can see the live picture to click the ‘connect’ button. After typing the id ...

  • Page 70

    70 trouble shooting ● connect power cable ● turn on power. ● connect dvr cable. ● turn on camera. ● connect cables of dvr and monitor. ● check whether ntsc/pal setting is setup properly ● check whether dvr and camera are connected properly ● use it after another use finishes using it. If another use...

  • Page 71

    71 this product guarantees free repair based on guarantee regulations only if the malfunction is caused while customers were using it properly. Warranty period warranty period begins from the day this product is delivered to customer. Tel : name : company : address : retailer tel : name : company : ...