3Ware 9650SE-8LPML-SGL Manual - page 42

Chapter 3. Installing the Battery Backup Unit

38

3ware 9650SE Serial ATA RAID Controller Installation Guide

4

While pressing down on the top of the battery module, lift out 

the bottom of the battery module slightly.

5

Once the bottom of the module is free, slide the module up to 

release the clips on the top. 

Figure 32.   Removing the battery module

6

Disconnect the battery power cable from the BBU. 

To do so, press down on the lever-like clip on the battery power 

connector and slide it out of the slot.

(If desired, you can remove the BBU control module to 

facilitate disconnecting the power cable.) 

Bottom clip

a) Push the battery 

module down gently.

b) Lift out the bottom 

of the battery module 

to release the clip on 

the bottom edge.

c) Lift up to remove 

the clips on the top 

edge.