Quick reference guide how to setup the vsx-1.3mp-pir1 on wi-fi. Vsx-1.3mp-pir1 camera.
Quick reference guide page 2 to properly set up the vsx-1.3mp-pir1 on wi-fi the following steps need to be taken. Note: default ip address for the vsx-1.3mp-pir1 camera is: 192.0.0.6 1 - connect the vsx-1.3mp-pir1 camera via the nic interface directly to the nvr, programming laptop or network switch...
Quick reference guide page 3 5 - login to the camera's user interface by clicking on the web settings button ( ) . Note: the default user: admin with password: 12345..
Quick reference guide page 4 6 - click the advanced configuration button ( ) , then click the network button ( ) , then click the tcp/ip button ( ) . 7 - select wlan from the select nic drop down list ( ) . Assign your ip address..
Quick reference guide page 5 8 - click the wi-fi tab ( ) and find your wireless ssid. 9 - enter the security mode ( ) and encryption type ( ) . 10 - enter your wireless network security key ( ) . 11 - the camera can now be disconnected from the programming pcvr 12 - set up the appropriate ip schem...
Quick reference guide page 6 the vsx-2mp-pir1 is now configured and accessible as one of the cameras ( ) currently installed on your network..
